snom VoIP Phone D712 User Guide

: June 6, 2024
: snom

Table of Contents

Delivery content
Attaching the Footstand
Connecting
Important Information
Safety Instructions
SELV (Safety Extra Low Voltage) Compliance
Standards conformance
Specifications
Disposal of the device
Cleaning
Copyright, Trademarks, Legal Disclaimers
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

snom VoIP Phone D712 User Guide

Delivery content

Attaching the Footstand

Connecting

Connecting Inductions

If no PoE available
Not included in delivery
Optional

Inductions

Important Information

Please read the instructions on safety and disposal and on how to set up and use the device before using it and also give them to other users to read or inform those users of their contents. Save this manual and do not give the device to third parties without it.

Safety Instructions

Follow the instructions in this manual and other applicable documentation of the device.
If the phone is not supplied with power via the Ethernet cable, use only a power adapter expressly recommended by Snom Technology . Other power supplies may damage or destroy the phone, affect its behavior, or induce noise.
Avoid placing the cables where people may trip over them or where they may be exposed to mechanical pressure as this may damage them.
This device is for indoor use only! NOT FOR OUTDOOR USE!
Do not install the device in rooms with high humidity (for example, in bathrooms, laundry rooms, damp basements). Do not immerse the device in water and do not spill or pour liquids of any kind onto or into the device.
Do not install the device in surroundings at risk for explosions (paint shops, for example). Do not use the device if you smell gas or other potentially explosive fumes.
Do not use the device during thunderstorms. Lightning striking the power grid may cause electric shocks.
Warning: The handset contains a magnet, and its earpiece may attract small dangerous objects such as needles or pins. Please ensure before each use that no such objects are present.

SELV (Safety Extra Low Voltage) Compliance

Safety status of input/output connections comply with SELV requirements.

Warning: To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and PSTN ports contain TNV circuits. Some LAN and PSTN ports both use RJ-45 (8P8C) connectors. Use caution when connecting cables.

Standards conformance

This device complies with the essential health, safety, and environmental requirements of all relevant European directives. The declaration of conformity can be requested from Snom (address see left column). This phone is FCC Class B certified and meets US health, safety, and environmental standards.

Unauthorized opening, changing, or modifying the device will cause the warranty to lapse and may also result in the loss of CE conformity and the FCC certification. In case of malfunction contact authorized service personnel, your seller, or Snom.

Specifications

Safety: IEC 60950
Connectors:
- 2 x RJ45 (Ethernet): 1x LAN, 1x PC
- 2 x 4P4C (handset, headset)
Ethernet: 2 x IEEE 802.3 / 2 x 10/100Mbps switch
Power over Ethernet (PoE): IEEE 802.3af, Class 1
If PoE not available: Snom power adapter A6 (5VDC 10 watts). Not included in delivery, available separately:
- EU: Snom PN 00004325)
- US: Snom PN 00004326

Disposal of the device

This device is subject to European Directive 2012/19/EU and may not be disposed of with general household garbage. If you do not know where to dispose the device at the end of its lifespan, contact your municipality, local waste management provider, or vendor.

Cleaning

To clean the device, use an anti-static cloth. Please avoid cleaning liquids as they might damage the surface or internal electronics of the device.

Setting up and connecting the phone: See figures B and C.

Initializing and registering the phone

NOTE: You will need the registration information received from your Internet service provider or your network administrator – normally the phone or extension number, the password, and the registrar.

After you have set up the phone and connected it to the network, it will begin to initialize. Normally the initialization is completely automatic, using DHCP.

If your network does not support DHCP, you must obtain the IP address, netmask, IP gateway, and DNS server from your Internet service provider or your network administrator and enter them manually when you are asked to do so on the display.

Watch the display and, when prompted, select an option by pressing the up or down arrow on the navigation key (Fig. D ). Save your selection by pressing the OK key .

Language. The default is English.
Time zone. Press the function key underneath Jump to go to the next time zone, then More to show all available options within that time zone.
Tone scheme (dial tone)
The display shows the “Welcome” screen. Press any key to log on.

NOTE: To find the phone’s IP address, press the Cancel key × for 3 seconds. Press the key again for 3 seconds to resume registration.
Enter the account number. Press to save.
Enter the registrar. Press to save.
Reboot the phone.
Enter the password received from your Internet service provider or administrator. Press to save. After successful registration you will see the idle screen.

For further information, please refer to the manual on our web pagewww.snom.com.

Copyright, Trademarks, Legal Disclaimers

Snom, the names of Snom products, and Snom logos are trademarks owned by Snom Technology AG. All product specifications are subject to change without notification. Snom Technology AG reserves the right to revise and change this document at any time, without being obliged to announce such revisions or changes beforehand or after the fact.

Although due care has been taken in the compilation and presentation of the information in this document, the data upon which it is based may have changed in the meantime. Snom therefore disclaims all warranties and liability for the accurateness, completeness, and currentness of the information published, except in the case of intention or gross negligence on the part of Snom or where liability arises due to binding legal provisions.