eve energy strip User Guide

Get Started

Safety Instructions

•  Do not connect appliances to this remote-controlled socket-outlet if the instruction manual of the appliances prohibits being remote-controlled (for example appliances according to 60335-2-9 like grills, toasters, and similar portable cooking appliances, or portable kitchen appliances, or appliances with heating elements like ovens or heaters, etc.).
• Do not connect any appliances to this remote-controlled socket-outlet that are radiating heat and may cause ignition or burning of surrounding materials (for example radiation heaters, portable heaters, portable floodlights, desk lamps, etc.).
• Take into consideration that connected appliances might be moved by pets, cleaning staff or other persons who are not aware of the remote control functions.
• Do not connect any appliances with potential hazards by moving parts (for example drills, table saws, blenders, etc.).
•  The connection/installation of this product should be in a suitable area with the remote-controlled socket-outlet easily readable and accessible for disconnection actions.
•  Do not cover when in use.
• Only voltage-free if the plug is pulled. Do not connect in series.
• Because of the extremely high energy level at a direct lightning strike, absolute protection of the connected devices cannot be guaranteed.

Specifications

• Total current rating: 16 A, 230 V (3.680 W)
• Overvoltage protection: 264 V
• Overcurrent protection: 16,2 A
• Thermal circuit breaker: 16 A
• Transient voltage surge suppression: Yes
• Child protection: Yes
• UOC: 5 kV
• UP: 1,2 kV (L-N, L-PE, N-PE)
• One-port SPD
• Short-circuit current rating ISCCR: 1.500 A
• Type of LV systems: TN system
• Residual current IPE : 0,15 mA
• Length of power cord: 188 – 196 cm
• Operating humidity: 5 % to 95 %, non-condensed| • Ambient air temperature: 0 °C – 35 °C
• Pollution degree: 2
• Rated impulse withstand voltage: 2,5 kV
• Number of operating cycles: 10.000
• Circuit disconnection: Micro-disconnection
• Continuous duty
• Glow-wire temperature: 750 °C
• Type of load: Resistive load
• Type and/or connection of switch:
Single pole/Single load
• Frequency Range: 2412 – 2472 MHz
• Max. RF Power (EIRP) < 18.11 dBm
• Standby Power Consumption: < 2 W
---|---

Get started

1. Plug Eve Energy Strip into an outlet.www.tuv.com
   

2. Download the Eve app from the App Store.

3. Open the Eve app and tap Add Accessory. Eve will now guide you through the setup process. If you have already set up another accessory, go to Settings in the Eve app to add Eve Energy Strip to your home.
   Eve Energy Strip can be controlled using the Eve app, the Home app, and Siri.

Enjoy

Eve Energy Strip can be controlled using the Eve app, the Home app, and Siri.

| Control
---|---
| Set schedules (no home hub required)
| Enable child lock
| Monitor energy consumption
| Install firmware updates

| Control
---|---
| Configure guest access

| Control
---|---

You can also use the onboard buttons to control devices connected to Eve Energy Strip.

Schedules automatically control devices connected to Eve Energy Strip – completely autonomously, independently of your iPhone or home hub. Set schedules that match your daily routine using the Eve app.

Securely access Eve Energy Strip while you’re away from home and set up powerful automations. Any Apple TV HD, Apple TV 4Kor HomePod using the same iCloud account as your iPhone will automatically serve as a home hub, no further setup is required.

Projected costs can be calculated based on the consumption of the last minute, day, or week. Go to Settings > General > Energy Cost to enter your electricity rate and accurately calculate costs.

Eve is designed to safeguard your personal data. All data is fully encrypted and only transferred directly between your Eve Energy Strip and iPhone, iPad or home hub.
Learn more at evehome.com/privacy

Surge Protection

The white LED remains illuminated to indicate that surge protection is fully functional.

If an electrical surge is detected, the fuse on the side of Eve Energy Strip will eject and the protection indicator LED will turn off.
To resume operation, unplug Eve Energy Strip and reinsert the fuse.

Mounting

Use ø 3 – 4 mm screws for mounting.

Reset

Please keep your HomeKit Setup Code in a safe place. You need it to securely add Eve to your home, and nobody but you has a copy.

Hereby, Eve Systems declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. The declaration of conformity is available at www.evehome.com/doc
Product: 10EAZ8301 • Model: 20EAZ8301 • Part: 51EAZ8303

Room…………………………………..
Notes…………………………………..

References

• Privatsphäre | evehome.com
• Vie privée | evehome.com
• Privacy is paramount | evehome.com
• Declaration of Conformity | evehome.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>