NetComm FAX Configuration Installation Guide
- June 6, 2024
- NetComm
Table of Contents
NetComm FAX Configuration
FAX configuration guide
This section of the guide provides you with instructions to configure FAX parameters in VoIP settings.
- Connect a computer and the modem using an Ethernet cable. (A yellow Ethernet cable is provided with your modem).
- Open a web browser (such as Internet Explorer, Google Chrome or Firefox), type following address into the address bar and press Enter. http://192.168.20.1
- Type admin in both the User Name and Password text boxes and click OK.
- Configure VoIP username, password and SIP server name as in the guide below. Navigate to Voice > VoIP status, the registration status should be up. Connect telephone line from the phone port to your handset and test whether you can make a call or not. http://support.netcommwireless.com/sites/default/files/NF18ACV-Generic-VoIP-Setup-Guide.pdf
- Once you can make a call, connect telephone line from the phone port to your printer/fax.
- Navigate to Voice > SIP Advanced Setting, select Fax Negotiate mode to Negotiate, tick Enable T38 support and Enable T38 redundancy support.
Note: The SIP service provide should also support fax. Contact your internet service provider to confirm if they support FAX service and collect the FAX settings.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>