HiBOOST C27G-5S-RV Travel 4G LTE Vehicle Cell Signal Booster User Guide
- June 6, 2024
- HiBOOST
Table of Contents
QUICK START GUIDE
C27G-5S-RV
Package Contents
Overview
How It Works
Getting Started
| Step 1
Mount the outdoor Omni-directional antenna to the roof of the vehicle using
the provided mounting equipment.
Tips: Near the center of the roof, At least 12 inches away from any other
antenna, Keep the maximum distance from the window (including sunroofs).
---|---
| Step 2
Connect the cable from the Outdoor Antenna to the port labeled Outdoor on the
booster.
| Step 3
Mount or place the indoor antenna to the desired location.
| Step 4
Connect the cable from the indoor antenna to the port Indoor on the booster
| Step 5
Connect the power supply cord to the end of the booster. Tips: If you
encounter issues with installation please see the “Troubleshooting” section of
the User Manual
QUICK START GUIDE
C27G-5S-BTW
Package Contents
Overview
How It Works
Getting Started
| Step 1
Clean the surface where you will place the outdoor antenna, mount the outdoor
antenna by placing it on top of the vehicle.
Tips: Near the center of the roof, At least 12 inches away from any other
antenna, Keep the maximum distance from the window (including sunroofs).
---|---
| Step 2
Connect the cable from the Outdoor Antenna to the port labeled Outdoor on the
booster.
| Step 3
Mount indoor antenna on the side of the seat or on the dashboard. Use the
velcro adhesive strip attached to the flat side of the antenna, Then mount to
the desired location.
Tips: DO NOT MOUNT WHERE AIRBAGS WILL DEPLOY!
| Step 4
Connect the cable from the inside antenna to the port Indoor on the booster
| Step 5
Connect the power supply cord to the end of the booster.
Tips: If you encounter issues with installation please see the
“Troubleshooting” section of the User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>