VeGue VS-0808 Wireless Portable Speaker Instruction Manual

June 6, 2024
VeGue

VeGue VS-0808 Wireless Portable Speaker Instruction Manual

VeGue VS-0808 Wireless Portable Speaker

VS-0808

Trouble shooting guide

FIG 1 Trouble shooting guide

Main technical specifications

  • Output power———————————– 250W

  • Input sensitivity—————————–500±30mV

  • SNR—————————————– ≥65dB

  • Frequency response————————26Hz~18KHz

  • Power supply—————————-AC 90V-240V~

  • Above specifications are the specifications of the sampling machine and are for reference purpose only.

  • Because of continuous product improvement.specifications will keep changing at any time without prior notification.

Common function description

  • Vol: Adjust volume
  • Treble: Adjust treble
  • Bass: Adjust bass
  • Mic Vol: Adjust microphone volume
  • Echo: Adjust echo
  • Mic: Wired microphone input

Product features

This system can be used with PC, DVD, VCD, MP3, Electronic Piano and any device with
audio output.

The amplifying circuit is designed with high performance and high fidelity, and equipped with
professional and high quality speaker, it can make the sound field positioning clear and layered.

The system voice effect is outstanding, the bass is surging and shocking, the middle tone is
strong and bright, the treble is crisp and pleasant.

Professional electronic frequency division circuit, so that the division point of the machine more
accurate, better effect.

The use of professional design and manufacture of large capacity batteries, as well as audio power supply capacitor makes the local power reserve margin more larger,more stable,better
dynamic,higher SNR.

Charging instructions

When charging, connect the supplied power adapter to AC 90V-240V~ for charging. The
charging time should be 6 ~ 8 hours. After being fully charged, unplug the power supply to avoid damage to the battery due to long-term charging.

Battery level indicator: There is a battery level indicator on the display.
When the battery power is low, the entire power indicator icon will flash, so please charge in time. When charging, the battery indicator icon will flash. After the flashing stops, the battery should continue to charge for 1 ~ 2 hours, which can prolong the battery life.

Note: If the battery is used out, please recharge the battery within 48 hours.Do not leave the empty battery for a long time, otherwise the battery will be damaged.

Remote control instructions

FIG 3 Remote control instructions

  1. Mute

  2. Song serial number

  3. Input selection

  4. The volume +

  5. Next

  6. The volume –

  7. Sound field effect

  8. Next file

  9. Previous file

  10. Recording

  11. Play the record

  12. PREV

  13. Play/Pause

  14. The light switch

  15. Repeat

  16. Under normal circumstances, the remote control should be used within a range of about 20 feet and 30 degrees from the remote reception window.

  17. When operating the remote control, point the remote control at the receiver window of the machine. There should be no obstacles between the remote control and the machine.

  18. If the receiving window is in the position of strong light, the remote control may fail. In this case, please remove the machine to avoid direct exposure to strong light.

  19. Please don’t make both new and old batteries work together,and regularly check whether the remote control batteries need to be replaced.

FIG 4 Remote control instructions

*Image diagram, for reference only

Description of controls

FIG 5 Description of controls

  1. The TF interface
  2. Bass volume
  3. The USB interface
  4. Treble volume
  5. Audio output
  6. Audio input
  7. Adjust microphone volume
  8. Guitar input
  9. Echo
  10. Microphone 1 input
  11. Guitar volume
  12. Microphone 2 input
  13. Recording/Recording playback
  14. PREV
  15. Play/pause
  16. NEXT
  17. Mode selection
  18. Light switch
  19. Microphone priority
  20. Play on loop
  21. Adjust volume
  22. The screen

Rear panel instructions

FIG 6 Rear panel instructions

  1. Power switch
  2. AC 90V-240V~
  3. Light switch
  4. DC 12V IN

*Image diagram, f or reference only

Guitar

Guitar jack: Connect guitar.
Guitar Volume: Adjust the guitar volume.

USB/TF

Music files in USB and TF cards should be formatted as FAT32 on the computer. The order about music play is based on file name,if the music file names are as “01,02,03”in sequence.This product will play the file “01”first.

Copy MP3 or WMA music files to USB/TF cards. It is recommended to delete unnecessary files and folders to speed up card reading and reduce card reading problems

Microphone controls and basic operation

FIG 9 Microphone controls and basic operation

*Image diagram, for reference only

Recording function

FIG 7 Recording function

Play function

FIG 8 Play function

Bluetooth operation

Bluetooth connection method:Turn on the speaker,press the ‘M’ key on the speaker panel,and the screen will show ‘BLUE’.Use your phone to connect the Bluetooth of the speaker.The Bluetooth name is VS-0808.

If the connection fails,please restart the device or the phone and try again. The use range of the Bluetooth is 32ft in the open area.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals