VeGue VW-022 Wireless Microphone System Operational Manual

VeGue VW-022 Wireless Microphone System

Introduction

The dual handheld wireless microphone sets offer 15 programmable frequencies for each UHF microphone and allow for the simultaneous usage of 15 sets of microphones. Line of sight operating distance up to 200 feet in open areas. The professional wireless microphone sets catch sound precisely and produce a more clear, pure, and rich sound thanks to a sophisticated microprocessor and cardioid dynamic capsule. Ideal for usage in classes, churches, home KTVs, large parties, DJ sets, and weddings. The dynamic wireless microphones include a corrosion-, impact-, and temperature-resistant steel mesh grille. Professional receiver with separate volume controls and an LCD display that shows the channel and frequency number, allowing for accurate vocal balancing. When turned on, cordless microphones and the receiver box will automatically sync. Note: Not suited for laptops, iPads, or cellphones. The metal receiver has two XLR output jacks and one 1/4″ audio output jack for connecting to your mixer, amplifier, or other PA systems.

TECHNICAL PARAMETERS

COMPREHENSIVE CHARACTERISTICS

RECEIVER

XLR Output Jack

Working voltage:| DC 12V
Working current:| ,;; 300mA

HANDHELD TRANSMITTER

RECEIVER FRONT PANEL FEATURES AND INSTRUCTIONS

• POWER Button: Press the power switch for 3 seconds, open power supply, LCD is bright; press the power switch for 3 seconds, the receiver power shut down.
• LCD Display: Display system in the current working state.
• Microphone A VOLUME control: Adjust the output volume. Clockwise rotation, the volume increase, Counterclockwise, the volume decrease.
• Microphone B VOLUME control : Adjust the output volume. Clockwise rotation, the volume increase, Counterclockwise, the volume decrease

RECEIVER BACK PANEL FEATURES AND INSTRUCTIONS

1. Antenna B connector
2. Balanced Output B
3. Mixing 6.35mm Output
4. DC Power Input
5. Balanced Output A
6. Antenna A connector

TRANSMITTER FUNCTION AND DESCRIPTION

• CD Microphone head Section: Including Microphone Cover Net and Microphone Cartridge Module.
• Display Screen: Display working channels, battery power, frequency.
• Switch button: Press for 3 seconds on/off the microphone.
• Frequency adjust button.

SYSTEM SETTINGS

1. Adjust the volume to the smallest before turned on the transmitter, then turn on the receiver, the LCD lights up and alphanumeric displayed, then LCD will display the channel and frequency of the receiver.
2. After the transmitter is installed with the battery, press the switch for 3 seconds, the transmitter enters normal operation.
3. Turn on the transmitter first. The screen of receiver will light on. Then adjust the volume. When speak, the AF on the screen will light. When no sound or AF doesn’t light, it means there is something wrong with the system and it needs repair.
4. Press the POWER button for 2 or 3 seconds to turn off the receiver.
5. The transmitter adjustable button (i.e., transmitter function and description point 4) directly adjusts different frequencies, press to change the frequency, the receiver can automatically match the corresponding frequency, A microphone and B microphone do not interfere with each other, all can work normally. If use multiple sets of microphones at the same time, it need to set all the microphone (press the adjustable buttons) to different frequencies.

RECEIVER SETTINGS

The display shows under normal working conditions_ As shown below:

RECEIVER LCD DISPLAY:

1. CD RF signal strength display(RF)
2. AF signal strength display(AF)
3. CHANNEL: display the current working channel
4. FREQUENCY: display the current working frequency

TRANSMITTER SETTINGS

HANDHELD TRANSMITTER DISPLAY:

1. BATTERY: Display the Remaining Electricity of Transmitter Battery. When the battery power is low, the sign flashes. The battery should be replaced immediately to ensure the normal operation of the transmitter.
2. FREQUENCY: Display current working frequency
3. CHANNEL: Display current working channel

CONNECTION DIAGRAM

Choose one of the following connection programs:

ACCESSORIES

TROUBLESHOOTING

No sound or

faint sound

| ****

Receiver LCD

monitor is off

| Make sure that one end of the AC adapter is plugged into a power outlet and the other end is plugged into the DC input jack on the rear panel of the recei ve r ;

Confirm that the AC power outlet is normal, and confirm that the power supply voltage is normal.

Transmitter power

indicator is off

| Turn on the transmitter power;

Verify that the +/- mark on the battery matches the

transmitter’s termination;

Insert a new battery.

Receiver display

RF level show

| Increase the receiver volume control;

Check the cable connection between the receiver and the amplifier or mixer.

Receiver display RF level no display, transmitter power light is on

| Vertically elongating the receiver antenna; Remove the receiver from the side of the metal object;

Check for obstacles between the transmitter and

receiver;

Moving the transmitter closer to the receiver ; Check that the receiver and transmitter are using the same frequency.

Transmitter power indicator flashes| ****

Replace the transmitter battery

Distortion or unwanted burst noise

| ****

Receiver display RF level show

| Remove nearby sources of RF interference (such as CD players, computers, digital devices, earphone monitoring systems, etc.);

Change the receiver and transmitter to different

frequencies ;

Replace the transmitter battery;

Increase the frequency separation between

systems if multiple systems are used.

The distortion level is gradually increasing| ****

Transmitter power indicator flashes

| ****

Replace the transmitter battery

FAQs

Is there any after-sale guarantee?****

Yes, VeGue provides up to 2 years of after-sales service, free return or replacement of non-human damage products. If you have any questions, please feel free to contact us. We will serve you with full sincerity!

If I connect it to a mixer can I still Bluetooth one mic in my phone at the same time?****

The Microphones Bluetooth to the box not the mixer. The mic box is hardwire connected to the “mixer” or whatever device you connect it to. So the answer lies in the capabilities of the mixer, not the mic. If the mixer will take audio in (mics) and still allow Bluetooth (phone), then yes. I use an ion speaker that way for karaoke.

Will this work without a mixer and with a 1/4 to aux converter into a speaker system?****

You can try out, I used them with my PA mixer system, they sound great, so clear ! The batteries last so long!

Is there a good speaker that would work with this?****

All of speakers in our store will work with this mic set.

can extra mic’s be ordered ?****

Sorry. We don’t sell extra mic, since other mic will not work with the machine.

Would this work for a wedding in a field where we don’t have access to power?****

You will need 120volt power source for the receiver. You could use a car battery and convertor 12v to 120v. Or depending on the amplifier speaker system, you might need a quiet generator.

How well do these work used as a stand mounted mic on a podium?****

Not bad, the sound is decent for that price.

My other mics I have been able to unscrew the top and remove the internal windscreen and wash it. what do I need to do to unscrew these tops? thanks****

You cannot unscrew these tops, so I doubt that they have an internal windscreen.

I can’t seem to get it connected to my speakers .. how to ?****

VW-022 only works the active speaker, which means your speaker must come with the AMP function.

Do you need to get a charger for the mic?****

no. they use 2 AA batteries per mic. I would recommend to use brand new ones before every gig.

Do I need a speaker for these microphones?****

You need a mix or MAP if you would like to connect a speaker or TV.

The receiver has TWO separated output, one for each microphone?****

Yes, but you can use only one output for both if you like, and control the volume of each one on the receiver, if you have limited inputs on your mixing board. They work great connected to only one output. Just don’t put too much low’s on your board or they will sound a bit distorted.

Can this setup (mic) operate independently of each other i.e. lxr mic output per channel?****

No, it doesn’t.

The power cable needs to be replaced. Where can I get a power adapter for this product?****

Please contact our customer service for help.

Can the output of this plug into my Onkyo receiver?****

yes but I wouldn’t recommend like that. one they will probably not sound good because onkyo receiver and the speaker. those things are designed to play CDS and DVDS etc. not play or receive microphone inputs ABD guitars, keyboards… it will work but you will be setting the receiver for an early retirement. these mics are to be used with a PA (Public address) gear such as mixers, amps and speakers where it is designed for high amounts of current drawn or the low impedance.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>