VeGue VWGO 2.4G Wireless Microphone Instruction Manual
- June 6, 2024
- VeGue
Table of Contents
VeGue VWGO 2.4G Wireless Microphone Instruction Manual
www.veguetech.com
support@veguetech.com
If you have any questions, please feel free to contact us.
MADE IN CHINA
Greetings from VeGue
Thanks for choosing VWGO Lavalier Microphone. We established a robust brand with great-value products and customer-friendly service here. Our designer spares no effort to write the user manual. Hope the manual could effectively help you to know roughly our microphone and deal with any problems when using it We hustle day and night work out with our engineer and designer on the microphone for better quality and user experience. If you have any questions, please feel free to contact us.
Have fun with our microphone!
VeGue Team
PACKAGE LIST
FUNCTION
1. TRANSMITTER
- Power Indicator
- Pair Indicator
- USB-C Charging Port
- Power Button/Pair Button
- Mic Jack
- In-built Mic
- Clipper
2. RECEIVER
- Power Indicator
- Pair Indicator
- USB-C Charging Port
- Vol-
- Power Button/Pair Button
- Vol+
- Headphone Output
- Clipper
INSTRUCTIONS
1. Indicator
2. Operating
-
Power
Hold down the power button for 2 seconds to turn on/off the machine. -
Pair
Automatically pairing when power on. To pair manually, please make sure both receiver and transmitter are off power. In the meantime, hold down both power button and volume button of RX receiver for 3 seconds to turn it on for pairing. Then, turn on the transmitter and it will pair automatically. -
Install
The Transmitter can be clipped to your clothes. And the Receiver can be clipped to camera/phone.
-
Connect
The receiver is able to output the audio to your device via 3.5mm TRS cable(camera) or 3.5mm TRRS cable(phone). Please choose the correct cable according to your device.
-
Record
The Transmitter can record your voice via the built-in mic (equipped with a Furry Windshield) or the extra Lavalier Microphone.
SPECIFICATIONS
1. Transmitter
2. Receiver
3. Microphone
Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the users authority to operate the
equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.