iClever Headphones Pairing: BTH12 Wireless Headset User Manual
- June 6, 2024
- iclever
Table of Contents
The iClever BTH12 Wireless Headset User Manual provides detailed instructions on how to use the product. The manual includes a package contents list, a product diagram, and information on how to turn the device on and off, pair it with Bluetooth, and switch between light modes. It also provides guidance on how to operate the buttons, answer and end calls, reject calls, and activate Siri. The manual includes a section on charging the headphone and an FCC statement. Additionally, the FAQ section answers common questions about the product, such as whether the control buttons can be disabled, whether two pairs can listen to the same iPad at one time, and what materials the device is made of. The manual also includes a video demonstration and a link to download a Declaration of Conformity. Overall, the iClever BTH12 Wireless Headset User Manual is a comprehensive guide that provides all the necessary information for users to operate the product effectively.
iclever BTH12 Wireless Headset
User Manual
Package Contents
Product Diagram
| 1. Power Button | 6. Volume – / Previous Track |
|---|---|
| 2. LED Indicator | 7. MFB Button |
| 3. Microphone | 8. Volume + / Next Track |
| 4. 3.5mm Audio Input | 9. Light Mode Switch Button |
5. Type-C Charging Port
On / Off
-
Power on:
Switch the button to the “ON” direction. Then the LED indicator flashes blue for 1 second, and the colorful lights are on. -
Shutdown:
Switch the button to “OFF” direction, and the headphone is turned off.
The LED indicator flashes blue for 1 second and then goes off.
Bluetooth Pairing
- In the power-on state, switch the button to the “ON” direction; the colorful lights are on; Bluetooth enters the pairing state, and the red and blue lights flash alternately.
- Turn on the Bluetooth of the mobile phone. Then find and select the “iClever-BTH12” Bluetooth pairing name in the device list for Bluetooth pairing connection.
Light Mode Switching
Short press the light mode switch button, and you can switch multiple light modes at will.
Volume Limit Gear Switching
- Press and hold the “+” & “-” buttons at the same time to switch the volume limit to 74dB, and the voice broadcast to “74dB”.
- Press and hold the “+” & “-” buttons at the same time to switch the volume limit to 85dB, and the voice broadcast to “85dB”.
- Press and hold the “+” & “-” buttons at the same time to switch the volume limit to 94dB, and the voice broadcast to “94dB”.
Note: The default power-on and factory reset are at 94dB volume limit.
Operation of Buttons
| Volume Up | Short press the “+” button. |
|---|---|
| Volume Down | Short press the “-” button. |
| Next Track | Press and hold the “+” button for 2 seconds. |
| Previous Track | Press and hold the “-” button for 2 seconds. |
| Play/Pause | Press the MFB button once. |
| Answer/End A Call | Press the MFB button once. |
| Reject A Call | Keep pressing the MFB button for seconds. |
| Activate Siri | Press the MFB button twice. |
| Clear The Pairing List | Press and hold the “+” button and “-” button |
simultaneously for 4 seconds in the power-on state to clear the pairing list. Then the headphone will automatically enter a pairing state.
Voice Prompt
| Power On | Power on |
|---|---|
| Power Off | Power off |
| Pairing | Pairing |
| Successful Pairing | Connected |
| Disconnection | Disconnected |
| Low Power | Battery Low |
How to Charge the Headphone
Connect the Type-C cable to the Type-C port on the headphone, and a 5V power outlet (power adapter is not included). The indicator light will glow red to indicate charging. When the headphone is fully charged, the indicator light will change from red to blue.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
SPECIFICATIONS
Brand
|
iClever
---|---
Model
|
BTH12 Wireless Headset
Package Contents
|
Headset, Type-C cable
Power Button
|
On/Off
LED Indicator
|
Power status, pairing status, battery level
Microphone
|
Yes
Audio Input
|
3.5mm
Charging Port
|
Type-C
Bluetooth Pairing
|
Yes
Light Mode Switching
|
Yes
Volume Limit Gear Switching
|
Yes
Buttons
|
Volume Up/Down, Next/Previous Track, Play/Pause, Answer/End Call, Reject Call, Activate Siri
Clear Pairing List
|
Yes
Voice Prompt
|
Power On/Off, Pairing, Successful Pairing, Connected, Disconnected, Low Power
Battery Life
|
Up to 10 hours
Materials
|
ABS plastic, leather
Color Options
|
Blue, Pink
Compatibility
|
Bluetooth-enabled devices, audio devices with 3.5mm input
Brand
|
iClever
Model
|
BTH12 Wireless Headset
Interference
|
No interference in signal
Comfort
|
Cushioned earpads, adjustable headbands
FAQS
Can you disable headphone control buttons?
When the headphone is connected with an audio cable, all the control buttons will not work. Thanks for the question.
Can two pair of these listen to the same iPad at one time on wireless mode? Example two kids in car with headphones watching one iPad
No, two pairs could not listen to the same iPad at one time on wireless mode, but on wired mode, you could use a splitter to do it.
What kind of plastics and materials is this made with?
It is mainly made with the ABS plastic and leather.
Will this be available in a color other than blue before Christmas?
Pink one is available for purchase, thank you for your question.
How to see remaining battery level?
On your device, it will show your battery level, my don charges them every night, they last from 6 a.m. till way beyond 10:00 p.m on a single charge
How to see the remaining battery level?
Please press and hold the “+” button and “-“button simultaneously for 4 seconds in the power-on state to clear the pairing list. Then the headphone will automatically enter pairing mode.
How do you get the Bluetooth pairing mode?
Please press and hold the “+” button and “-“button simultaneously for 4 seconds in the power-on state to clear the pairing list. Then the headphone will automatically enter pairing mode.
Is there any interference in the signal If everyone uses this headset in the classroom?
No. The signal will not be disturbed. Thank you for your question.
Will two of these work in the same room on different devices?
Yes
Will this work with bluetooth enabled TV
Yes, I’ve successfully connected to our Samsung TV.
Are these comfortable over the ears? Current ones we have hirt my 8 yo ears after a while
Our headphones come with the cushioned earpads and adjustable headbands, ensuring kids’ comfort all day long.
VIDEO
Find more about Declaration of Confirmity, please click the below link to download: http://files.iclever.com/BTH12-DOC- EN.pdf
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>