magnum L7 Display Instruction Manual
- June 6, 2024
- magnum
Table of Contents
L7 Display
L7 Display
Instruction Manual
This manual will include installation information, setting information, and
instructions for normal use of the L7 display used on some of Magnum’s
electric bike models.
Appearance & Measurement
Extended time in temperatures below -4 F or above 140 F can cause damage and
deterioration of the L7 display.
Dimension figure (unit: mm)
Function Display
Indicated functions are as below
L7 Views
Full View Area
Normal Operation
Section 1: ON/OFF
Press M to activate the display. To turn the display off, press M for 2
seconds, and the screen will go dark. If the display is powered off it will
not consume any of the battery life. The panel will automatically power off
when the speed is 0 km/h for 5 minutes.
Section 2: Current Indicator
The power indicator shown below displays how much energy is being consumed by
the system.
Section 3: Speed Display
Speed indicator displays the riding speed in km or mph.
Section 4: Backlight Indicator
With the power on, press “+” for 1 second to turn on the backlight. Press it
for 1 second again to turn off the backlight.
Section 5: Walk Mode
Hold “-” for 2 seconds to enter into the walk mode. When the icon is lit, the
e-bike is traveling at 4.5mph. The walk mode indicator is shown below.
Section 6: Pedal Assist Level Selection
Click UP or DOWN to change the level of pedal-assist you wish to receive. The
levels range from 0-6, with 0 being the lowest and 6 being the highest. When
the bike is powered on, the bike will automatically enter level one. Please be
aware that the levels loop: when you are at level 6 and press UP you will
return to the lowest level and when you are on the lowest level and press DOWN
you will enter the highest level.
Section 7: Distance Indicator
When the display is on, press M to switch the display information. The four
options are shown below.
ODO
The ODO records the driving mileage from use.
Trip Distance
Trip distance records the driving mileage for individual trips. Hold the “+”
for 5 seconds and the trip distance will be reset and skipped to the trip
distance interface as shownn below.
Trip Time Indicator
The trip time records riding time as shown below.
Max Speed
The max speed records the riding speed as shown below.
Battery Indicator
When the battery capacity is high the six battery segments are all lit. When
the battery is low the battery frame will flash. Flashing indicates that the
battery is severely low and needs to be recharged immediately.
Stay Connected
| @magnumbikes
---|---
| @magnumbikes
| www.magnumbikes.com
| [email protected]
| 323.375.2666
| [email protected]
---|---
| 323.375.2666
| www.magnumbikes.com