MAGNUM Z-Wave Control Instructions
- June 6, 2024
- magnum
Table of Contents
MAGNUM Z-Wave Control I
This Z-Wave thermostat is an electronic thermostat for installation in a standard wall box. The thermostat has a built-in Z-Wave 500 chip that can be connected with home automation systems such as Fibaro, Sensio, Vera, Zipato. The display shows the floor or ambient temperature. The thermostat is equipped with touch-sensitive buttons. By lightly pressing the buttons, the display will show the set value. The Z-Wave thermostat is equipped with a single-pole switch. It can be used with two external temperature sensors.
Delivery
MAGNUM Z-Wave thermostat does not come standard with the MAGNUM underfloor
heating kits.
Order procedure:
Choose a separate MAGNUM Mat, MAGNUM Cable or MAGNUM Foil in the correct size
and add to this the Z-Wave thermostat.
What is Z-Wave?
Z-Wave is the name of a wireless signal to control devices in your house
called domotics (home automation). Briefly allows you to program your home
(e.g .: when the thermostat turns on / off). And operate it all remotely
through your tablet or smartphone.
Compatible systems
MAGNUM Z-Wave thermostat works with systems like Fibaro, Vera, Zipato and
Sensio.
Technical details
- Space and floor sensor
- Temperature limiter
- Built-in Z-Wave chip 500 series
- Week program through gateway
- Can be used in combination with NTC-sensors
- 8 scenarios
- Works with Fibaro, Sensio, Vera and Zipato systems.
- Suitable for: Gira, Jung, Elko, Merten, Busch Jager etc.
Technical data
- Voltage: 230 Volt – 50/60 Hz
- Max. load: 16A / 230V
- Temperature: + 5 / + 40 Åã C
- Protection: class IP21
- Colour: Polar White (RAL 9003)
- CE: inspection
Warranty
2 year warranty on the electrical operation and floor sensor.