OEM C6 Wall Mounted Automatic UV Light Smart Toothbrush Sanitizer Instruction Manual
- June 6, 2024
- OEM
Table of Contents
OEM C6 Wall Mounted Automatic UV Light Smart Toothbrush Sanitizer
Daily Care
- The toothbrush slot is removable and washable, and easy to disassemble and install.
- Do not wash the whole device with water for its precision circuit and lithium battery.
Notices
- Pasted wall should be dry, dust-free and smooth, such as tiles, marble, glass and so on.
- Do not hang overweight items, please use this product in its bearing range.
- Attention should be paid to the battery waterproof, avoidance of violent impact, recycling and environmental protection.
Product Specification
| Product Name: Smart Toothbrush Sanitizer | Product Model Number: C6 |
|---|---|
| Sterilization Way: UVA | Rated rower: 1.5W |
| Charging Input: 1000mA | Battery Capacity: 4800mAh |
| Charging Time: 5 __ hours | Sterilization Wavelength: 200~280mm |
| Installation Way: Bonded | Package Size: 194 120 60mm |
Product Function
-
UVA Sterilization
This product uses Philips DUV chip to sterilize, UVA to inhibit bacteria. The sterilization rate is as high as 99.99%.
UVA Sterilization Opening Methods:- Press the power button to start. Sterilization will stop automatically after 2 minutes.
- The sterilizer sterilizes automatically eight times a day, one minute each time.
Automatic sterilization time as follows:
AM
| 5:00| 7:00| 9:00| 11:00
---|---|---|---|---
PM| 17:00| 19:00| 21:00|
23:00
Time Adjustment
You need to set the machine time when you get it at first time.
Set hours: Long press the top button “H”, the screen displays “08:–” to
enter the hour setting mode. Then, press “HIM” to add or subtract. Long press
the top button “H” again to confirm the completion of the setting.
Set minutes: Long press the top button “M”, the screen displays “–:08” to
enter the minute setting mode. Then, press “WM” to add or subtract. Long press
the top button “M” again to confirm the completion of the setting.
Battery Indicator
This product has the reminder function of power shortage, charging process and charging completion.
- The charging icon on the screen flashes when someone is near the device whose power is below 20%.
- The charging icon on the screen lights up when the device is charging.
- The charging completion icon lights up after the charging is completed.
The device is equipped with a Type-C data cable, which can be charged with a phone charger plug or a charger bank. It can be fully charged after about 4 to 6 hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>