OEM TT-2MBBYI Bulb Security Smart Camera User Manual
- June 4, 2024
- OEM
Table of Contents
OEM TT-2MBBYI Bulb Security Smart Camera
Product Overview
Download Yi loT app
Sign up/ log in
How to add camera
Choose connection
Camera Installation
If you don’t hear the sequence, please press the “RESET on the device.
Continue for more than 5 seconds, until you heard the sequence, that means the
reset is successful
The QR code that appears on the mobile phone is scanned against the camera
lens, and the device emits a prompt sound ‘QR code scan successful and WiFi
connected”, click Next, and wait for the network configuration to be
completed.
How to use app
Cloud Storage
Common problems
Q: The camera is offline
- Check if the power supply is working properly
- Power off and restart the device to reconnect to the network
- The signal coverage is weak
- Signal interference shielding in special places
- make sure you are connected to 2.4G wifi
Q: How does the camera store video
- The camera supports the F32 format with a maximum capacity of 128 G. After the card is recognized, it automatically records, and when the storage is full, it automatically Overwrites the original recording and loops recording;
- Using YI IOT cloud storage service to store video(optional) (should be purchased separately)
Note
Do not install this product in a place where it is damP dusty, high
temperature, flammable or explosive and keep out of reach of children.
FOC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.