YG300 Mini Projector User Guide: Safely Power, Use, and Maintain Your White LED Projector
- June 5, 2024
- OEM
Table of Contents
The OEM YG300 Mini Projector White User Guide provides essential information and advice on how to safely power, use, and maintain your white LED projector. It is important to read the user manual carefully before using the projector. The guide recommends using a national standard power cable and power cord with grounding to ensure stable power supply. It is also essential to use the same power voltage as marked on the projector to avoid damage. The guide advises against opening the projector as it may void the warranty service. Additionally, one should avoid peeking at the projector lamp while it is working to prevent eye damage. The guide also provides instructions on how to prepare the projector before turning it on, including connecting the power adapter and adjusting the focus. The user interface, connection introduction, and menu guide are also explained in detail. The guide also highlights the technology features of the projector, including imaging technology, contrast, native resolution, light, projection distance, and aspect ratio. Finally, the guide provides information on power supply options and the dimensions of the projector.
oem YG300 Mini Projector White
Safety notice
- Please read use manual carefully before you use projector.
- National standard power cable and power cord with grounding is suggested,so as to ensure stable power supply.
- Please use the same power Voltage with the projector marked.
- Please not open the projector,other.vise factory not afford warranty service.
- No peeking to the proJector lamp as the projector is working, other.vise easy to damage your eyes.
- In the projector ventilation holes.please don’t cover with the cloth,carpet and other materials.
- No waterproof function, please keep projector away the rain or moisture,and can’t put some liquid items such as vase cup those.
- In order prevent power shock,please keep away rain or water or moisture.
- Turn off,and cut off the power supply, if long time not useza projector.
- Use the originally foam or other unti-shock material to protect projector,lf you need transport this projector.
- Contact with the agency,don’t repair by yourself,lf you find the projector have problem.
- extend the projector life span and protect your eyesight, we suggest you may have a break after 3-4 hours using
Preparation before light on
- As following picture, connect the power adapter(DC 12V/1.5A)
- following picture, indicator on projector will be on after power adapter connected.
- Power on/Power off Press “C.>” button on projector or remote control to switch on the projector.
- Remote control introduction
- User Interface After the projector is switched on, the following UI wil appear after 2-5s starting pictures flash.
- Focus Locate projector vertical to the projection screen, adjust the keystone wheel till you get clear picture (square pixels appear). You can play some video or display the menu to check focus adjustment.
Connection Introduction Multi-media Connection
Insert USB/SD card with content to relevant ports.
Choose a multi-media signal source. Press • )] ” on projector or remote control to choose relevant channel.
Multimedia supported format
Choose the content which you need display: Movie,Music,Photo Text.
Choose the file which you want to display, press display or stop
Video equipment connect
Use 3 in 1 cable video convert cable,connect projector AV slot,the connect method like the picture,as connected,choose the signal source Video.
HDMI equipment connect
HDMI slot could connect computer and all the device with HDMI slot. As
connected, choose the signal source HDMI
Supported file
576P, 480P, 720P, 1080P, 640×480, 800×600,1024×768, 1280×1024,
1280×720,1440×900,1920×1080, 1366×768, 1280×800,1440×960,1600×1200, 1680×1050
5mm Audio device connect
Menu guide
Menu set
image menu remote control use guide: press” =” key, then the main menu comes
out, pres key, choose come into the image submenu, press key choose key the
program which you want to adjust, then press ok key come into set.
‘!bu could choose the picture ma: J€, correlated color temperature, aspect
ratio, noise reduction, a projection made, image scaling in the settings.
Audio submenu
Press key. and get the main menu. then press chooses audio submenu, press
chooses the items which you need to adjust, then press the OK key to come into
set.
In the set, set the language in menu language set, back to factory set and software upgrade.
Set Sub-menu
Press “=” key on the remote control,then press key to set the submenu;
Presskey choose the program which needs adjustment,and press the OK key comes
to set. Set the projector language,back to factory set and software upgrade.
Display menu use guide
You could control the content by the display menu.
Power supply by a portable charger
YG300 support power supply by portable charger with 5V/2A output. Connect projector Mirco USB port with portable charger 5V/2A out port via USB cable to charge the projector.
Built in battery power supply (Available for models with built in battery
only)
Switch the button under power supply port to “ON » , then projector will be
charged by built-in battery. In this situation, projection brightness will be
a little bit lower. Battery symbol will appear on projection screen to
indicate the remained power volume. After turning off the power of the machine
then recharging it.it will take about 3 hours for charging.
Technology features
| lmagingTechnology | TFT LCD |
|---|---|
| Contrast | 800 1 |
| Natrve Resct.rtia7 | 480’272 pixels |
| SL.q:rrt Resct.rtia7 | 1920*1080Pxds |
| Light | LED |
| Prq,sdioo Dlstarn; | 1.5-2M |
| Pn::j;d:00 Size | 24- |
| Projector Ratio | 1.13:1 |
| Aspect Ratio | 16:9 |
| Cobc | 16.7M |
Power Supply
| □
Standard
| Adapter:12V-15A
Mobile rower:5V-2A
□
Built in
battery
| Adapter:12V-1.5A
Mobi le rower:5V-2A
lithium battery:7.4V/1300mAh
UnrtSize| 1215.4·85.8″47.7 1T111
SPECIFICATION
| Product Specifications | Details |
|---|---|
| Brand | OEM YG300 Mini Projector White |
| Safety Notice | Read the user manual before using the projector. Use a national |
standard power cable and power cord with grounding. Use the same power voltage
as marked on the projector. Do not open the projector. Do not peek at the
projector lamp while it is working. Do not cover the ventilation holes. Keep
the projector away from rain or moisture. Do not repair the projector by
yourself. Have a break after 3-4 hours of use.
Preparation before Light On| Connect the power adapter (DC 12V/1.5A). The
indicator on the projector will be on after the power adapter is connected.
Press “C.>” button on projector or remote control to switch on the projector.
Adjust the keystone wheel till you get clear picture. Choose a multi-media
signal source.
Connection Introduction| Insert USB/SD card with content to relevant ports.
Use 3 in 1 cable video convert cable to connect projector AV slot for video
equipment. HDMI slot could connect computer and all the device with HDMI slot
for HDMI equipment.
Supported File| 576P, 480P, 720P, 1080P, 640×480, 800×600,1024×768, 1280×1024,
1280×720,1440×900,1920×1080, 1366×768, 1280×800,1440×960,1600×1200, 1680×1050
Menu Guide| Use the remote control to adjust image, audio, and set sub-menu.
Control the content by the display menu.
Power Supply| Standard Adapter:12V-15A, Mobile Power:5V-2A, Built-in Battery
Adapter:12V-1.5A, Mobile Power:5V-2A, Lithium Battery:7.4V/1300mAh
Unit Size| 121.5 x 85.8 x 47.7 mm
Technology Features| TFT LCD Imaging Technology, 800:1 Contrast, 480×272
Native Resolution, 1920×1080 Pixels Supported Resolution, LED Light, 1.5-2M
Projection Distance, 24- Projector Size, 1.13:1 Projector Ratio, 16:9 Aspect
Ratio, 16.7M Color
FAQS
What should I do if I find the projector has a problem?
Contact the agency and do not repair the projector by yourself if you find it has a problem.
How should I transport the YG300 Mini Projector?
Use the originally foam or other anti-shock material to protect the projector if you need to transport it.
How should I store the YG300 Mini Projector when not in use for a long
time?
Turn off and cut off the power supply if not using the projector for a long time.
How can I protect myself from power shock when using the YG300 Mini
Projector?
To prevent power shock, please keep the projector away from rain, water, or moisture.
Is the YG300 Mini Projector waterproof?
No, the YG300 Mini Projector does not have a waterproof function. Please keep it away from rain or moisture, and do not put any liquid items such as a vase cup near it.
Can I cover the projector ventilation holes with cloth or carpet?
No, please don’t cover the projector ventilation holes with cloth, carpet, or other materials.
Is it safe to peek at the projector lamp while it is working?
No, it is not safe to peek at the projector lamp while it is working as it may cause eye damage.
Can I open the projector to fix any issues?
The guide advises against opening the projector as it may void the warranty service.
Can I use a power voltage different from what is marked on the projector?
No, it is essential to use the same power voltage as marked on the projector to avoid damage.
What kind of power cable and cord should I use with the YG300 Mini
Projector?
The OEM YG300 Mini Projector White User Guide recommends using a national standard power cable and power cord with grounding to ensure stable power supply.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>