audio-technica BP896 MicroPoint Omnidirectional Condenser Lavalier Microphone User Manual

audio-technica BP896 MicroPoint Omnidirectional Condenser Lavalier

Microphone User Manual

Thank you for purchasing this product. Before using the product, read through the user manual to ensure that you will use the product correctly.
Please keep this manual for future reference.

Features

• Subminiature clip-on lavalier microphone designed for broadcast production and theater settings

• Microphone diameter of just 2.6 mm for the ultimate in lowprofile, high-performance audio

• Extremely intelligible, natural audio

• Handles high sound pressure levels with ease

• Locking 4-pin microphone output connector compatible with included power module and all Audio-Technica UniPak® bodypack wireless transmitters

• Rugged design and construction for reliable performance

• UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality

• Offered in black and beige (-TH) models RoHS-compliant—free from all substances specified in the EU directive on the
  reduction of hazardous substances (RoHS)

• Also available in wireless models (without power module) terminated for use with all Audio-Technica UniPak® wireless systems and many other manufacturers’ wireless systems

Notes on use

The BP896 requires 11V to 52V phantom power for operation, and includes a 1.4 m permanently attached miniature cable. Its free end connects to the provided AT8539 power module via a locking 4-pin connector. The connector is also compatible with all Audio-Technica UniPak® body-pack transmitters. The output of the power module is a 3-pin XLRM-type connector.
Avoid leaving the microphone in the open sun or in areas where temperatures exceed 43°C for extended periods. Extremely high humidity should also be avoided.

Safety precaution

Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product.

Cautions for the product

• Do not subject the product to strong impact to avoid malfunction.
• Do not disassemble, modify or attempt to repair the product.
• Do not handle the product with wet hands to avoid electric shock or injury.
• Do not store the product under direct sunlight, near heating devices or in a hot, humid or dusty place.

Connection procedure

Connect the output terminals of AT8539 power module to a device that has a microphone input (balanced input) compatible with a phantom power supply. The
output connector is an XLRM-type with polarity as shown in the figure below.

Specifications

• 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
• Typical, A-weighted, using Audio Precision System One.

For product improvement, the product is sublect to modification without notice.

Polar pattern

Cable Terminations

BP896cW, BP896cW-TH – Terminated with locking 4-pin connector for use with A-T UniPak ® body-pack transmitters

Audio-Technica Corporation

2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan ©2017 Audio-Technica Corporation Global Support Contact: www.at-globalsupport.com

Read More About This Manual & Download PDF:

References

• Global Support｜Audio-Technica Corporation オーディオテクニカ

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>