BOGEN Professional Handheld Stage Microphone HDU250 Instruction Manual
- June 6, 2024
- BOGEN
Table of Contents
BOGEN Professional Handheld Stage Microphone HDU250
DESCRIPTION
The HDU250 is a dynamic, uni-directional handheld microphone ideal for acoustically-demanding environments. It features a heavy zinc die cast case with a rigid, low noise cable-mount system and a lockable silent reed switch. It has a cardioid pickup pattern and an extra low handling noise, floating shock-mounted Neodymium capsule. The HDU250 has high sound pressure capability without distortion and a low sensitivity to breath/pop noise. The HDU250 has a rubberized black finish.
POLAR GRAPH
FREQUENCY RESPONSE GRAPH
SPECIFICATIONS
- MIC Type: Handheld
- Element: Moving coil dynamic
- Polar Pattern: Uni-directional
- Impedance: 250-ohm
- Frequency Response: 50Hz to 18kHz
- *Sensitivity:** -72dB +/- 3dB
- S/N Ratio: Over 65dB
- Cable: XLR Male [pin 1 = shield (gnd), pin 2 = signal (+), pin 3 = signal (-)]
- Switch: With sliding-type on/off switch (lockable, silent reed switch)
- Dimensions: 7″ H x 1-1/4″ Dia.
- Product Weight: 1 lb.
- Material: Zinc die cast
- Finish: Rubberized black finish
LIMITED WARRANTY
Bogen microphones are warranted to be free from defects in material or
workmanship provided that the product has not been subjected to abuse or
accident or altered in any way for one (1) year from the date of sale to the
original purchaser. Any part of the product covered by this warranty that,
with normal installation and use, becomes defective will be repaired or
replaced by Bogen, at our option, provided the product is shipped insured and
prepaid to: Bogen Factory Service Department, 50 Spring Street, Ramsey, NJ
07446, USA. The product will be returned to you freight prepaid. This warranty
does not extend to any of our products that have been subjected to misuse,
improper storage, neglect, accident, improper installation or have been
modified or repaired in any manner that Bogen believes may affect the
reliability of the product, or where the serial number or date code has been
removed or defaced.
THE FOREGOING LIMITED WARRANTY IS BOGEN’S SOLE AND EXCLUSIVE WARRANTY AND THE
PURCHASER’S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WARRANTIES OF ANY
KIND, EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED.
Bogen’s liability arising out of the manufacture, sale or supplying of
products or their use or disposition, whether based upon warranty, contract,
tort or otherwise, shall be limited to the price of the product. In no event
shall Bogen be liable for special, incidental or consequential damages
(including, but not limited to, loss of profits, loss of data or loss of use
damages) arising out of the manufacture, sale or supplying of products, even
if Bogen has been advised of the possibility of such damages or losses.
Products that are out of warranty will also be repaired by the Bogen Factory
Service Department — same address as above or call
201-934-8500. The parts and labor
involved in these repairs are warranted for 90 days when repaired by the Bogen
Factory Service Department. All shipping charges in addition to parts and
labor charges will be at the owner’s expense.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>