BOGEN NQ-SMS1810-VF Variable Firing Sound Masking Speaker Instruction Manual
- October 30, 2023
- BOGEN
Table of Contents
BOGEN NQ-SMS1810-VF Variable Firing Sound Masking Speaker
Product Information
The NQ-SMS1810-VF Speaker is a versatile speaker that can be used for upward- firing, downward-firing, or side-firing operation. It comes with hangers that can be relocated to the bottom of the assembly to change the direction of the sound output. The speaker is designed to be hung from a structurally sound hang point using the supplied chain. The product has been tested to UL Standard 2043.
Product Usage Instructions
Preparation:
- Upward-firing Operation: Use as shipped. (Figure1)
- Downward-firing Operation: Relocate hangers to the bottom of the assembly. (Figure 2)
- Side-firing Operation: Relocate one hanger to the bottom of the assembly. (Figure 3)
Installation:
- Determine a structurally sound hang point for the enclosure.
- Install the speaker to the desired height using the hanging chain.
- Note : AHJ/local codes may require a secondary tie-off to the structure.
Electrical Connection:
- Feed the supply cable through whip (if required) to connector.
- Cut bare wire tip off of unused speaker lead.
- Feed connection points through the clamp into the enclosure and tighten the clamp screws.
- Rotate the switch to the desired power setting.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>