gembird USB Video Grabber UVG-002 Instructions

June 6, 2024
GEMBIRD

gembird logo

UVG-002
USB VIDEO GRABBERgembird USB Video Grabber UVG-002
-figure

Download most actual driver: Win 7/8/10
SERIAL SOFTWARE: TVR25-NMBGG-HGGGH-362DC-6BMG6

De-install all old drivers before installing the most actual one
Restart your computer after installing the softwaregembird USB Video Grabber
UVG-002 -figure 1

Open Software and select Property Settingsgembird USB Video Grabber UVG-002
-figure 2

In ‘Video Setting’ choose OEM Device as ‘Video capture device’ and select PAL_D as a video standard
NOTE: You can also download for free OBS Studio. www.obsproject.com

If you have problems:

  1. Disable virus scanners and check if the firewall doesn’t block anything
  2. Try the enclosed extension cable between the computer and grabber
  3. If you have that cable connected, try it without.
  4. When possible, connect all 3 cables directly.
  5. Connect all cables correctly.
  6. If you’re using a SCART connector, make sure it’s set on OUTPUT

gembird USB Video Grabber UVG-002 -figure 3

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals