METER ATMOS 14 User Guide
- June 6, 2024
- METER
Table of Contents
METER ATMOS 14
SUPPORT
Have a question or problem? Our support team can help.
We manufacture, test, calibrate, and repair every instrument in house. Our
scientists and technicians use the instruments every day in our product
testing lab. No matter what your question is, we have someone who can help you
answer it.
NORTH AMERICA
Email:
support.environment@metergroup.com
Phone: +1.509.332.5600
EUROPE
Email: support.europe@metergroup.com
Phone: +49 89 12 66 52 0
Preparation
Verify that all ATMOS 14 components arrived intact. Installation will require
a mounting post.
Set up and test the system (sensors and data loggers) in a lab or office.
Ensure the data loggers are using up-to-date firmware and software. Verify all
sensors read within expected ranges.
Please read the complete ATMOS 14 User Manual at
metergroup.com/atmos14-support. All
products have a 30-day satisfaction guarantee.
ATTENTION
For best results, use the latest versions of METER software and firmware
for the computer or mobile device, and sensors. Please use the software Help
menu to find updates. Consult the sensor user manual for more troubleshooting
tips.
Installation
-
Check Radiation Shield
Ensure the sensor is securely installed in the radiation shield.
-
Install on Mounting Pole
Use the radiation shield mounting bracket and bolt to mount the radiation shield to the mounting pole at the desired height.
Use a wrench to tighten the bolts, securing the radiation shield to the mounting pole.
-
Plug Sensor In and Configure Logger
Plug the sensor into the data logger. Use data logger software to apply appropriate settings to the sensors plugged into each data logger port.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>