ZAGG ID9RMK-BBO Rugged Messenger Case iPad-10. User Guide
- June 7, 2024
- ZAGG
Table of Contents
ID9RMK-BBO Rugged Messenger Case iPad-10.
1. Intering Your Device:
Fst rsert your device at an ange so that the power button, volsme control,
camera hole, and the opening for your charging cable ft into their respective
cutouts on the Rugged Messenger Case. Next set the rest of your iPad into the
case and pressit in. Press all around your Pad to make sure the tablet s
secure,
2. Ataching te Snap-On PET Screen:
Place the PET screen on the device as it sits inside the Rugged Messenger
Case, Algn the screen withthe sides ofthe case and then snap it into place on
the case.
3. Using the Stand:
Fold the cover/built-in stand back, away from the case and lay it flat while
holding the iPad at an angle perpendicular to it, Bend at the first fold of
the cover to create a triangle. Press the remaining narrow strip of the built-
in stand against the back of the case. The strip is magnetized and will click
into place against the back of the case, The magnets will hold the case in
place at that angle until you choose to move it.
4. Adjusting the Viewing Angle: ****Your Rugged Messenger Case features built-in magnets that work together with the built-in cover to create three different viewing angles, To adjust the viewing angle of your iPad, simply slide the builtin kickstand up or down along the Rugged Messenger Case until you feel the magnets connect: there are three different sets of magnets built into the case to create multiple viewing angles.
ZAGG and Rugged Messenger Case are trademarks of ZAGG Intellectual Property Holding Co, Inc. iPad i a trademark of Apple Inc, registered inthe US. and other counties.
ZAGG
Rugged Messenger Case
Durable Case with Snap-on Screen Protector
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>