Gear4music JDP-1 Junior Digital Piano User Manual
- June 6, 2024
- Gear4music
Table of Contents
JDP-1 Junior Digital Piano
User Manual
WARNING!
- Do not open cover. No user-serviceable parts inside. Refer servicing to qualified service personnel
- Do not place the product in a location near a heat source such as a radiator, or in an area subject to direct sunlight, excessive dust, mechanical vibration or shock
- The product must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the product
- No naked flame sources, such as lighted candles, should be placed on the product
- Allow adequate air circulation and avoid obstructing vents (if present) to prevent internal heat build-up. The ventillation must not be impeded by covering the appliance with items such as newspapers, table-cloths, curtains etc.
INTRODUCTION
Thank you for purchasing the JDP-1 Digital Piano by Gear4music. To get the most out of your product, please read this manual carefully.
CONTENTS
- 1 x JDP-1 MB/ JDP-1-WH Digital Piano
- 1 x Power supply unit (PSU)
- 1 x Sustain pedal
- 1 x JDP-1 piano bench
- 1 x User manual
FEATURES
- Inspiring children’s piano – with full-size keys, touch sensitivity and sustain pedal.
- The ideal first digital piano for young learners and players.
- 61 full-size keys give you the best start to playing.
- Link up to fun and inspiring teaching apps with USB connectivity.
FUNCTIONS
-
POWER / VOLUME
Use this knob to power on the JDP-1 as well as adjust the volume. -
USB TO HOST
Use this input to connect the JDP-1 to your computer and use as a MIDI controller. -
AUX IN
Use this input to connect your tablet/mobile phone/computer to the JDP-1 to listen and perform with music through the speakers. -
PEDAL
Use this input to connect a sustain pedal to the JDP-1. -
HEADPHONES
Use this to connect a pair of headphones to the JDP-1 for silent practice. Please note, when headphones are connected to the device the speakers are disabled. -
DC 10V INPUT
Use this to insert the PSU to power up the JDP-1 when connected to a power outlet.
POWER
After assembling the piano, safely connect the supplied power supply firstly
to the piano and then to the mains. Turn on the piano by turning the [POWER
ON-OFF / VOLUME] dial to the “on” position.
SETTING THE VOLUME
The [POWER ON-OFF / VOLUME] can also be used to adjust the volume to your
desired level when playing. Turn the dial in a clockwise direction to increase
the volume.
USING HEADPHONES
A standard pair of headphones can be connected via the HEADPHONES output on
the back panel of the piano for private practice. The internal speakers are
automatically muted when headphones are connected.
AUX IN
The AUX IN jack allows you to mix an external sound source (such as a smartphone or MP3 player) with the piano’s internal sounds, for playback through the piano’s in-built speakers or headphone output. The volume of the AUX IN is controlled by the external sound source.
USB TO HOST
The JDP-1 can be connected via USB (cable not included) to a tablet, laptop,
or desktop computer, providing an ideal function for using compatible
software, for example piano tuition apps.
SUSTAIN PEDAL
The foot pedal included with your digital piano can be connected to the PEDAL
input and, when held down, allows the sound of the notes played to decay
slowly, or “sustain.” Ensure the piano is turned off before connecting the
pedal.
VOICE SELECTING
The piano has 8 different in-built voices: Piano, Electric Piano, Vibraphone,
Church Organ, Dog, Sheep, Bird, Applause.
To select the required voice, hold down the first 3 keys (two white and one black) and then press one of the top 8 keys, as shown in the following diagram:
DEMO SONG
To play the in-built demo song, hold down the first 3 keys (two white and one
black) and then press the top black key, as shown in the following diagram:
To stop the demo song, hold down the first 3 keys (two white and one black) and then press the top black key again.
PIANO KEY TOUCH SENSITVITY
The JDP-1 features touch sensitive piano keys which can respond to the nuances
of playing, giving the player a better learning experience and helping in
developing proper technique.
The touch sensitivity’s default setting is on, however it can be turned off by holding down the first 3 keys (two white and one black) and then press the second to the top black key, as shown in the following diagram:
Repeat this process to turn the touch sensitivity back on.
SPECIFICATIONS
-
Keys: 61 Full Size Velocity Sensitive
-
Polyphony: 32 Notes
-
Connections: 10V DC Power, Aux Input, Headphones Output, USB to Host, Sustain
-
Speakers: 2 x 20W Included
-
Accessories: PSU, Piano Bench, Sustain Pedal & Owner’s Manual
-
Piano Dimensions:
Height: 600mm x;
Width: 930mm x;
Depth: 330 mm -
Bench Dimensions:
Height: 365mm x
Width: 381mm x
Depth: 310 mm -
Piano Weight: 13Kg
-
Bench Weight: 3.6Kg
KETTLESTRING LANE | YORK | YO30 4XF | UNITED KINGDOM
If you have any more questions about this product, please do not hesitate to
contact the
Gear4music Customer Service Team on: +44 (0) 330 365 4444 or
info@gear4music.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>