METER ES-2 Electrical Conductivity + Temperature User Guide
- June 6, 2024
- METER
Table of Contents
METER
ES-2
Electrical Conductivity + Temperature
ES-2 QUICKSTART
The ES-2 is designed to measure the electrical conductivity and temperature of water-based solutions.
Preparation
Confirm that ES-2 components are intact. Gather the necessary pipe fittings
and glue or suspension setup for the desired installation type as well as the
necessary items for the data acquisition system installation.
Read the full ES-2 User Manual at
metergroup.com/es2-support. All products
have a 30-day satisfaction guarantee.
Before going to the field, connect the ES-2 to the data acquisition system and
ensure proper communication.
Compatibility
ES-2 sensors are fully integrated into the METER system of plug-and-play
sensors used with both the METER AROYA System and software for horticulture
and the METER SENTRA System and software for science and agriculture.
Refer to the AROYA Hardware QuickStart and the AROYA User Manual at
aroya.io/support for specific details on how to use
the ES-2 with the AROYA System.
Refer to the SENTRA Setup Support Video at metergroup.com/ Sentra-setup for
specific details on how to use the ES-2 with the SENTRA System.
Information for use with non-METER data acquisition systems can be found in
the ES-2 Integrator Guide at
metergroup.com/es2-support.
ATTENTION
For best results, use the latest versions of METER software and firmware for
the computer or mobile device, products, and sensors.
Installation
1Install Sensor
Pipe Installation. Apply PVC glue to the outside of the end cap, following the
manufacturer’s instructions. DO NOT apply glue to cap slots. Slide the ES-2
into a 1-in Tee socket pipe fitting, ensuring the end cap alignment notch is
in the direction of flow. Orient the cable end down or to the side. Secure and
protect cables with PVC casing or flexible conduit.
Tank or Water Body Installation.
Suspend the sensor in the tank or water body away from the sides of the tank
or water body as much as possible. Secure and protect cables with PVC casing
or flexible conduit.
2. Check Sensor Operation
Connect the sensor to the data acquisition device and check sensor operation.
3. Configure Software
Use the application software to apply appropriate settings to the sensors plugged into the data acquisition device. Review data and check values.
SUPPORT
Have a question or problem? Our support team can help. We manufacture, test, calibrate, and repair every instrument in the house. Our scientists and technicians use the instruments every day in our product testing lab. No matter what your question is, we have someone who can help you answer it.
Email:
support.environment@metergroup.com
Phone: +1.509.332.5600
Email: support.aroya@metergroup.com
Phone: +1.509.332.5844| EUROPE
Email: support.europe@metergroup.com
Phone: +49 89 12 66 52 0
---|---
References
- AROYA Support | AROYA
- Home of METER | METER Group, Inc. USA
- ES-2 Electrical Conductivity and Temperature Sensor | METER
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>