GARMIN Striker 7 Series Flush Mount Template Instructions
- June 6, 2024
- Garmin
Table of Contents
Printing a Mounting Template
NOTICE
It is not recommended that you print a mounting template on your own. Use the
template that came in the product box.
If you do print the template, you must follow these instructions for printing
a mounting template precisely. To print large templates, you need large enough
paper and a printer. Failure to have the correct sized paper and printer, or
a failure to follow these instructions, may result in an incorrectly sized
template and therefore an incorrect cutout (too large or too small) on the
mounting surface of your boat.
-
Select File > Print.
-
Select None for Page Scaling ➊.
-
Ensure the checkmark is next to Auto-Rotate and Center ➋.
-
Drag the arrow ➌ to the right, to view page 2 in the window below.
-
Verify that the paper size is larger than the template ➍.
In this example, the paper is not larger than the template. -
If the paper size is not large enough, select Properties ➎ and select a Page Size that is larger than the template.
NOTICE
Garmin is not responsible for any damages or expenses resulting from a miscut
mounting surface arising from a failure to follow these instructions.
- Compass Safe Distance
- STRIKER 7 Series 30 cm (11.81 in.)
