GARMIN GPSMAP 16×3 Flush Mount Template User Guide
- May 15, 2024
- Garmin
Table of Contents
Printing a Mounting Template
GPSMAP 16×3 Flush Mount Template
NOTICE
It is not recommended that you print a mounting template on your own. Use
the template that came in the product box.
If you do print the template, you must follow these instructions for printing
a mounting template precisely. To print large templates, you need large enough
paper and printer. Failure to have the correct sized paper and printer, or a
failure to follow these instructions, may result in an incorrectly sized
template and therefore an incorrect cutout (too large or too small) on the
mounting surface of your boat.
NOTE : The options and locations of the options differ between Adobe Acrobat versions and other PDF viewing/printing applications. Be sure the scaling is 100% before printing.
-
Select File > Print.
-
Enter 2 in Pages to Print ➊.
-
Select Actual Size ➋ for Page Sizing & Handling.
-
Verify that the paper size is larger than the template ➌.
In this example, the paper is not larger than the template. -
If the paper size is not large enough, select Properties ➍ and select a Paper Size that is larger than the template.
-
After printing the template, use a ruler to measure at least one dimension line to ensure the template printed to 100% scale.
NOTICE
Garmin is not responsible for any damages or expenses resulting from a miscut
mounting surface arising from a failure to follow these instructions.
- 3.2 mm (1/8 in.) pilot hole for wood screws 6 mm (1/4 in.) for nut plate Tap to M4 if no nut plate
- 3.5 mm (9/64 in.) for nut plate
GPSMAP 16×3 Series Flush Mount Template
CUT ALONG THE INSIDE OF THE LINE
Documents / Resources
|
GARMIN GPSMAP 16x3 Flush Mount
Template
[pdf] User Guide
GPSMAP 16x3 Flush Mount Template, GPSMAP, 16x3 Flush Mount Template, Flush
Mount Template, Mount Template
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>