GARMIN HH4V-152500-1000-10 Electronic Fence Emitter User Manual
- June 1, 2024
- Garmin
Table of Contents
GARMIN HH4V-152500-1000-10 Electronic Fence Emitter
Product Information
Specifications:
- Size: Standard
- Material: ABS+PC, PBTG15
- Serial Number:
name| quantity| Material| Color
---|---|---|---
Upper cover| 1| ABS+PC| Black
Connector| 1| PBTG15| White
Lower shell| 1| ABS+PC| Black
Product Usage Instructions
Connector Pin Definition:
- Pin 1: CAN_L
- Pin 2: CAN_H
- Pin 3: GND
- Pin 4: VCC
Buzzer Working Conditions:
- Reverse: Buzz for 45ms, Pause for 405ms
- SOS: Buzz for 45ms, Pause for 150ms
- Status Study: Long beep for 500ms, 3 beeps Buzz for 45ms, Pause for 300ms
Product Nameplate Details:
- Product Name: Electronic Fence Emitter
- Product Model: HH4V-152500-1000-10
Usage Scenario:
When the ATV equipped with a transmitter approaches and crosses the
electronic fence, the transmitter sends a warning signal to the receiver. The
receiver, connected to a phone via BLE, allows the manager to receive warning
messages through the Spring Wind APP to control the ATV, enhancing safety and
security.
Frequently Asked Questions (FAQ):
- Q: How do I reset the device?
A: To reset the device, press and hold the reset button for 10 seconds until the indicator lights flash.
Product Description
Size
Material
Serial number| name| quantity| Material Science|
Colour
---|---|---|---|---
1| Upper cover| 1| ABS+PC| Black
2| Connector| 1| PBTG15| white
3| Lower shell| 1| ABS+PC| Black
Connector Pin Definition
Pin Definition
1| 2| 3| 4
CAN_L| CAN_H| GND| VCC
Buzzer working condition
Buzzer working condition
Reverse status| SOS| Study| APP call| Safe distance warning| Trigger safety
distance| Parameter setting successful
Buzz for 45ms Pause for 405ms| Buzz for 45ms Pause for 150ms| Long beep for
500ms 3 beeps
Buzz for 45ms Pause for 300ms
| Buzz for 45ms Pause for 405ms| Buzz for 45ms Pause for 405ms| Buzz for 50ms Pause for 100ms| 2 beeps (Buzzing for 60ms) Pause for 200ms)
Product nameplate
- Product Name: Electronic Fence Emitter
- Product model: HH4V 152500 1000 10
- FCC ID: 2A2NKHQB204 T01 023
- Hardware version: HW: XX: XX Software version: SW: XX: XX
- Batch: XXXX/Xx/XX Supplier Code: 501951
- Manufacturer Name: Zhejiang Hongquan Electronic Technology Co., Ltd
- Manufacturer Address: 508 Tianzihu Avenue Tianzihu Town, Anji County, 313300 Huzhuo City Zhejiang Province PEOPLE’S REPUBLIC OF CHINA
- Importer Name: Mgo.Markus Ferch
- Importer Address: Alpenstrasse 14 TOP1 A5020 Salzburg AUSTRIA
Technical parameters
- Working voltage range: 9 16V, average working point current: 70 mA
- Lora E.I.R.P ≤23dBm communication frequency: 905.25MHz 921.5MHz
- Working temperature: 30~50 ℃, storage temperature: 40~85 ℃
- GPS cold start time: less than 40 seconds
- Buzzer 85 ± 7dB
Installation method
The launch end is installed on the frame at the junction in front of the engine and below the steering wheel of the ATV(all-terrain vehicle) The launch end weighs 98±5g and is fixed on the frame beam using screws and nuts.
Usage Scenario
When the ATV(all-terrain vehicle) equipped with a transmitter approaches and
crosses the electronic fence, the transmitter transmits a warning signal to
the receiver. The receiver device is connected to the phone through BLE, and
the manager receives the warning message through the Spring Wind APP to
control the ATV(all-terrain vehicle), thereby improving the safety of ATV(all-
terrain vehicle) users and enhancing the sense of security for the elderly.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated with a minimum distance
of 20-cm between the radiator & your body and must not be co-located or
operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>