TUNTURI C65-F Crosstrainer Performance Instruction Manual
- October 30, 2023
- Tunturi
Table of Contents
C65-F Cross trainer Performance
Instruction Manual
C65-F Crosstrainer Performance
|
---|---
http://manuals.tunturi.com| https://qrco.de/bbMlmH
– Please read this assembly manual carefully prior to assembling this product.
|
---|---
|
|
|
|
|
|
|
|
|
USER MANUAL ON OUR WEBSITE
To reduce the impact on the environment, you will only find the assembly steps
in this manual.
To learn how to use this product, please download the user manual from:
manuals.tunturi.com
Welcome
Important Safety Instructions
This Owner’s Manual is an essential part of your training equipment: reading
all instructions in this manual before you start using this appliance. The
following precautions must always be followed:
Safety warnings
⚠ WARNING
- Read the safety warnings and the instructions. Failure to follow the safety warnings and the instructions can cause personal injury or damage to the equipment. Keep the safety warnings and the instructions for future reference.
⚠ WARNING
- Heart rate monitoring systems may be inaccurate.
- Over exercise may result in serious injury or death. If you feel faint stop exercising immediately.
– The equipment is suitable for domestic use only. The equipment is not
suitable for commercial use.
– Max. usage is limited to 5 hrs a day.
– The use of this equipment by children or persons with a physical, sensory,
mental or motorial disability, or lack of experience and knowledge can give
cause to hazards. Persons responsible for their safety must give explicit
instructions or supervise the use of the equipment.
– Before starting your workout, consult a physician to check your health.
– If you experience nausea, dizziness or other abnormal symptoms, immediately
stop your workout and consult a physician.
– To avoid muscular pain and strain, start each workout by warming up and
finish each workout by cooling down. Remember to stretch at the end of the
workout.
– The equipment is suitable for indoor use only. The equipment is not suitable
for outdoor use.
– Only use the equipment in environments with adequate ventilation. Do not use
the equipment in draughty environments in order not to catch a cold.
– Only use the equipment in environments with ambient temperatures between 10
°C and 35 °C. Only store the equipment in environments with ambient
temperatures between 5 °C and 45 °C.
– Do not use or store the equipment in humid surroundings. The air humidity
must never be more than 80%.
– Only use the equipment for its intended purpose. Do not use the equipment
for other purposes than described in the manual.
– Do not use the equipment if any part is damaged or defective. If a part is
damaged or defective, contact your dealer.
– Keep your hands, feet and other body parts away from the moving parts.
– Keep your hair away from the moving parts. z
– Wear appropriate clothing and shoes.
– Keep clothing, jewellery and other objects away from the moving parts.
– Make sure that only one person uses the equipment at a time. The equipment
must not be used by persons weighing more than 135 kg (300 lbs).
– Do not open equipment without consulting your dealer.
– If you experience nausea, dizziness or other abnormal symptoms, immediately
stop your workout and consult a physician.
– To avoid muscular pain and strain, start each workout by warming up and
finish each workout by cooling down. Remember to stretch at the end of the
workout.
– The equipment is suitable for indoor use only. The equipment is not suitable
for outdoor use.
– Only use the equipment in environments with adequate ventilation. Do not use
the equipment in draughty environments in order not to catch a cold.
– Only use the equipment in environments with ambient temperatures between 10
°C and 35 °C. Only store the equipment in environments with ambient
temperatures between 5 °C and 45 °C.
– Do not use or store the equipment in humid surroundings. The air humidity
must never be more than 80%.
– Only use the equipment for its intended purpose. Do not use the equipment
for other purposes than described in the manual.
– Do not use the equipment if any part is damaged or defective. If a part is
damaged or defective, contact your dealer.
– Keep your hands, feet and other body parts away from the moving parts.
– Keep your hair away from the moving parts.
– Wear appropriate clothing and shoes.
– Keep clothing, jewellery and other objects away from the moving parts.
– Make sure that only one person uses the equipment at a time. The equipment
must not be used by persons weighing more than 135 kg (300 lbs).
– Do not open equipment without consulting your dealer.
Electrical safety
(Only for equipment with electric power)
– Before use, always check that the mains voltage is the same as the voltage
on the rating plate of the equipment.
– Do not use an extension cable.
– Keep the mains cable away from heat, oil and sharp edges.
– Do not alter or modify the mains cable or the mains plug.
– Do not use the equipment if the mains cable or the mains plug is damaged or
defective. If the mains cable or the mains plug is damaged or defective,
contact your dealer.
– Always fully unwind the mains cable.
– Do not run the mains cable underneath the equipment. Do not run the mains
cable underneath a carpet. Do not place any objects on the mains cable.
– Make sure that the mains cable does not hang over the edge of a table.
– Make sure that the mains cable cannot be caught accidentally or tripped
over.
– Do not leave the equipment unattended when the mains plug is inserted into
the wall socket.
– Do not pull the mains cable to remove the mains plug from the wall socket.
– Remove the mains plug from the wall socket when the equipment is not in use,
before assembly or disassembly and before cleaning and maintenance.
Assembly instructions
Description illustration A
The illustration shows what the trainer will looks like after the assembly is
completed.
You can use this as a reference during your assembly, but do follow the
assembly steps always in the correct sequence as showed in the illustrations.
Description illustration B
The illustration shows what components and parts you should find when un-
boxing your product.
NOTE
- Small parts can be hidden/ packed in hollow spaces in the Styrofoam product protection
- If a part is missing, contact your dealer.
Description illustration C
The illustration shows the hardware kit that comes with your product.
The hardware kit contains bolts, washers, screws, nuts etc. and the required
tools to properly fit your trainer.
Description illustration D
The illustrations shows you in the correct following order how to assembly
your trainer best.
NOTE
- Part numbers shown in the assembly steps are commencing with the spare part drawing that can be found in the online full version user manual.
⚠ WARNING
- Assemble the equipment in the given order.
- Carry and move the equipment with at least two persons.
⚠ CAUTION
- Place the equipment on a firm, level surface.
- Place the equipment on a protective base to prevent damage to the floor surface.
- Allow at least 100 cm of clearance around the equipment.
- Refer to the illustrations for the correct assembly of the equipment.
Additional assembly information.
Additional information to Assembly step D8 & D9
– Establish the wire connection between the cable coming from the main frame,
and the lower part of the cable pre fitted in the upright tube.
– Place the upright tube over the main frame fixing bracket, in where the
fixing bolts are preassembled and stay pre-assembled.
( While lowering the upright tube, gently pull the upper part of the cable up,
to avoid the cable get caught by the connection.)
– The upright tube should automatically find the centre position, but it is
advisable to make the slightest correction needed to make sure the position is
good.
– The perfect position is when the fixing bolts are perfectly centered in line
with the upright tube holes.
NOTE
- Avoid the cable connection between these two parts get pinched.
- By fastening the two bolts (turning in clockwise direction) on the front side you will widen the fixing bracket so the upright gets fixed firmly.
– To fix the upright tube firmly it is needed to tighten the bolt on the upper
side first firmly. – After fixing the upper bold, you need to fix the lower
bold firmly.
– By fixing the lower bold, the upright tube will be repositioned slightly
resulting that the upper bold can be fixed a little more, therefore it is
needed to fix the upper bolt again.
– Repeat these steps until both bolts are firmly fixed to ensure the upright
tube fixation well.
NOTE
- Save the tools provided with this product, after you completed the product assembly, for future service purposes.
Use
Adjusting the support feet
The equipment is equipped with 6 support feet. If the equipment is not stable,
the support feet can be adjusted.
– Turn the support feet as required to put the equipment in a stable position.
– Tighten the locknuts to lock the support feet.
NOTE
- The machine is the most stable when all support feet are turned fully in. Therefore start to level the machine by turning all support feet fully in, before turning out the required support feet to stable the machine.
⚠ WARNING
- To prevent damages on your floor, make sure “U shape holder” can’t touch the floor when using the trainer. (fig. G) Gain height for the “U shape slider” by adjusting the “Adjusting cushion” if needed. ( See Assembly step D-3)
Adjusting the console
The console can be adjusted according to the height and the exercise position
of the user.
– Loosen the console adjustment knob.
– Move the console to the required position.
– Tighten the console adjustment knob.
Power supply (Fig. E)
The trainer is powered by an external power supply. Refer to the illustration
to locate the trainer’s power input.
NOTE
- Connect the power supply with the trainer before connecting it to the wall outlet.
- Always remove power cord when machine is not in use.
Additional information
Packaging disposal
Government guidelines ask that we reduce the amount of waste material disposed
of in land fill sites. We therefore ask that you dispose of all packaging
waste responsibly at public recycling centres.
End of life disposal
We at Tunturi hope you enjoy many years of enjoyable use from your fitness
trainer. However, a time will come when your fitness trainer will come to the
end of its useful life. Under ‘European WEEE Legislation you are responsible
for the appropriate disposal of your fitness trainer to a recognised public
collection facility.
Warranty
Tunturi purchaser‘s warranty
Warranty terms
The consumer is entitled to the applicable legal rights stated in the national
legislation concerning the commerce of consumer goods. This warranty does not
restrict these rights. The Purchaser’s Warranty is only valid if the item is
used in an environment approved by Tunturi New Fitness BV for that particular
equipment. The product-specific approved environment is stated in the Owner’s
Manual provided with your equipment.
Declaration of the manufacturer
Tunturi New Fitness BV declares that the product is in conformity with the
following standards and directives: EN 957 (HA), 2014/30/EU. The product
therefore carries the CE label.
04-2020
Tunturi New Fitness BV
Purmerweg 1
1311 XE Almere
The Netherlands
Disclaimer
© 2020 Tunturi New Fitness BV All rights reserved.
– The product and the manual are subject to change.
– Specifications can be changed without further notice.
– Check our website for the latest user manual version.
www.tunturi.com
Tunturi New Fitness BV
Purmerweg 1
P.O. Box 60001
NL – 1311 XE Almere
NL – 1320 AA Almere
The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>