SAMSUNG 19.5 cu. ft. French Door User Manual
- June 6, 2024
- Samsung
Table of Contents
19.5 cu. ft. French Door
MODEL RF20A5101 DIMENSIONS
Be sure your new fridge will fit
Don’t wait until delivery to be sure your new refrigerator will fit – both in your kitchen and through all doorways. This guide includes all pertinent measurements and clearances so you can buy with confidence.
Standard Depth Refrigerator
Standard depth refrigerators typically measure 30 to 35 inches in depth, as opposed to counter depth refrigerators that sit flush with cabinetry.
Installation clearances
Allow 3 ¾” of clearance when installing along a wall. This will allow for the
door to open 90 degrees without the handle contacting the wall.
Allow 2″ minimum clearance at rear for proper air circulation and
water/electrical connections.
Allow a ⅜” minimum clearance at sides and top for ease of installation.
For optimal usage and ability to open refrigerator doors completely, do not
install next to a wall.
Please note: The above dimension and cutout information is for planning
purposes only. For complete installation details, consult manual packed with
product or download manual online at samsung.com.
Walk the delivery route
Identify the narrowest opening that the appliance will travel through, from
outside the home to the location where it will be installed.
Appliance depth or width must be smaller than the width of the narrowest
opening
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>