Vistefly FT201 Smart Light Bar User Manual

Vistefly FT201 Smart Light Bar User Manual

Bracket installation steps

How to install APP:

1.1 ) . IOS and Android system mobile phone can download the APP by scanning the QR code. Open a browser or other apps with the “Scan QR Code” function and scan the following
QR code to download the APP.

APP name: BanlanX

1.2). IOS system need IOS10.0 or higher; Android system need Android 4.4 or higher.
1.3 ) . Please note that the location must be opened before connecting to the APP, otherwise the connection will fail.
2.1 ) . Install the APP ,click the” “icon to enter the application page.
2.2 ) . After entering the application interface, if Bluetooth is not enabled, the application will enable the Bluetooth function of this device, please click “Allow”.
2.3 ) . Please note that the device can only connect to one phone at a time. Make sure no other phones are connected to the device before connecting.
3. Open the App and click on the upper right corner of the homepage to scan for devices and add devices; You can also create groups to group the added devices;

4. Solid color Interface

5. Dynamic mode interface

6. Music mode interface

Note: In a music mode, setting the light effect length to 25 will works best.

7. 38-key controller

Note: The timing function can only set up to 5 work tasks. Please note that when the controller is powered off, all set timing tasks will be deleted.

8.Application scenario

Switch key: turn on and off the controller;
Mode key M: The mode key is used to switch non-music mode;
Speed key S: Adjust the effect speed of non-music mode.

9. Two-way installation

Application scenario

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>