aaxa SLC450 Short Throw Mini Projector Owner’s Manual
- June 13, 2024
- aaxa
Table of Contents
SLC450 SHORT THROW
MINI PROJECTOR
SLC450 Short Throw Mini Projector
User
Guide
Caution!
WARNING: Please use this product as instructed. Misuse may cause injury
or death.
DO NOT use while driving
DO NOT expose to water or wet surfaces. Electric shock may occur
DO NOT expose the projected LED image to your eyes or the eyes of others
DO NOT block or restrict airflow from ventilation holes as this may cause the
projector to overheat
Keep the projector, battery, or charger away from any heat sources
Chapter 1 SLC450 at a Glance
Main Unit
Remote & Keypad
Both the keypad and remote can be used
to navigate through the menus. The Main Menu Navigation on the remote
functions exactly the same as the directional pad on the SLC450 unit.
Accessories
*Under various circumstances, the actual accessories may be different from those shown in the pictures above.
Additional accessories are available for purchase at
www.aaxatech.com
Chapter 2 Getting Started
Powering ON the projector
- Connect the power cord to the SLC450.
- Connect the other end of the power cord into the wall power source.
- Press the switch on the back of the projector and the projector will turn on automatically.
Standby Mode
- To transition to “STANDBY” mode, press the power button on the remote control.
- The optical engine should power off and the fan should stop spinning. The projector is now in “STANDBY” mode and can be turned on using the remote control.
*Note: Standby mode will still consume a small amount of power.
Powering OFF the projector
- To turn off the projector, press the “Power Switch” twice. This will turn off the projector completely.
Focus Adjusment / Throw Distance
Focus Adjustment
- Spin the focus wheel up or down until the image becomes clear.
Throw Distance Chart
| Throw Distance | Diagonal Size |
|---|---|
| Units: Inches | Units: Inches |
| 20 | 32 |
| 30 | 48 |
| 40 | 64 |
| 50 | 80 |
| 60 | 96 |
| 70 | 112 |
| 80 | 128 |
| 90 | 144 |
| 100 | 160 |
Throw Ratio 0.7:1
Projection Angle: 100% Offset
*minimum throw distance: 10 inches
Connecting Speakers / Headphones
Step 1: Connect your speakers/headphones to the projector’s audio port.
Step 2: Ensure that the projector and/or the headphones are powered on.
Step 3: Place the headphones on and enjoy!
*CAUTION: Prolonged use of headphones at a high volume may impair
hearing.
Loading External Content
The SLC450 can read files directly from both a TF Card and USB drive.
Supported file types include:MP3 / WMA / OGG / WAV / AVI / MP4/JPG / GIF/PDF /
DOC/XLS / PPT
How to insert your TF Card
- Slide in your TF card into the TF card slot on the side of the SLC450 (as shown in picture).
- Gently slide the TF card until it clicks into place.
How to insert your USB Drive
- Slide your USB Drive into the USB port.
- Gently slide the drive until it cannot go in any further.
Once your TF Card or USB Drive is inserted into the projector, the TF Card or
USB Drive Storage will be loaded automatically and the content can be found
through the Files icon on the Main Menu ( See Page 21 for File Viewer
Submenu). To load Text documents, select the Office icon.(See Page 18 to learn
more)
Chapter 3 Menu Screens
Main Menu
The SLC450 features Android 9.0 Onboard and an Onboard Media Player.
This function allows the projector to play videos, pictures, and music files
directly from your connected devices.
- Press the left and right directional buttons to choose an icon from the main menu.
- To select a menu option, press the “OK” button in the middle of the navigation pad.
- To go back to the previous screen, press the “Back” button.
- To Jump back to the submenu, press the “Menu” button once.
- To return to the main menu, press the “Return” button twice.
Brightness Menu
To change the brightness on your SLC450:
- Select the “Settings” icon (Fig. 3.1) in the Main Menu then choose “Brightness” (Fig. 3.2)
- Select the brightness you wish (Fig. 3.3): Eco Mode/ Standard Mode/ Boost Mode
“Boost mode” should only be used in low
temperature, low altitude environments with adequate clearance of exhaust/
intake vents. A tripod is highly recommended. DO NOT block vents while
operating in Boost mode.
Wifi Menu (How to connect to Wifi)
How To Connect to Wifi:
- In the Main Menu, choose the “Wifi Setup” icon (Fig 3.4)
- In the Wifi Menu, toggle the Wifi icon to “On” and select the Wifi network you desire. Enter password and connect. (Fig 3.5)
Mirroring Menu
How To Screen Mirror Smartphone:
- After connecting the SLC450 to wifi,in the main menu,choose“mirroring”icon (Fig 3.6)
- In the Mirroring Menu, choose Android or iOS (Fig 3.7)
- Use built-in AirPlay, AirPinCast, AirPinPCSender to screen mirror from your iOS devices, Android portable devices or Windows PC
Mirroring Menu
To screen mirror, your devices and the
SLC450 have to be connected to the same Wifi network. DMCA (copyright)
content cannot be wirelessly mirrored. This includes content from streaming
services such as Netflix, Hulu, Disney+, etc.
Mirroring Menu To screen mirror Android device, after connecting the
SLC450 and your device to the same WiFi network, please use “Smart
View”.
To screen mirror iOS device, after
connecting the SLC450 and your device to the same WiFi network, please select
“AAXA SLC450” in the Screen Mirroring menu.
Streaming Services Menu
After connecting the SLC450 to Wifi , select the “streaming Services ” icon
in the Main Menu.
Select the streaming service you wish to open.
Streaming Services require subscription including paid subscription. Users are
responsible for their own subscriptions. Not all streaming apps are compatible
in all regions. 
Note: Different regions will feature different streaming apps.
• Additional Streaming Apps can be downloaded via the App Store.The App store
can be found under Apps and App Store.
Note: Not all regions support the App Store or the downloadable apps.Some
regions may not include App Store on the device.
Office Menu
In the Main Menu, select the “Office” icon to access the N Docs app.
FAQ: How to load a file in Office
Load your external content to the SLC450 by using a USB stick or a Micro
SD/ TF Card. 
FAQ: How to load a file in Office In the main menu, select the “Office”
icon. The office documents (Word, Excel, PowerPoint or Templates) should show
in “Office – Microsoft”
Select “Microsoft” and choose the file you wish to open. Use the keypad on the
top of the SLC450 or the remote control to nagivate.
Files Menu
Opening A File:
- Select the “Files” icon in the Main Menu ( Fig 3.8)
- In the Files Menu, select the external content device (USB/ Micro SD – TF Card) that contains the file you wish to open (Fig 3.9)
The SLC450 will show all folders and files you have on your USB or TF
Card drive.Use the navigation buttons to select folders or files.
Browser Menu
How to open an internet browser in the SLC450
In the Main Menu, select the “Browser” icon. Once the Chrome browser opens,
press the button on the navigation pad or the remote control to search or type
web address, You also use the “Simulate Mouse” on the remote control to switch
between mouse mode.
Apps Menu
To access more apps in the SLC450:
- In the Main Menu, select the “Apps” icon (Fig 3.10)
- In the Apps Menu, select the app you wish to open (Fig 3.11)
Note: It is not recommended that users load their own apps onto the SLC450
Connecting to Device via Digital Input
First, a digital input cable is required from your SLC450 to your other
device.
Connectivity to Multimedia Devices
The SLC450 can connect to many media devices including: computers, laptops,
iPhones, iPads, DVD players, smart phones, cameras, video game consoles and
other peripherals with ease. The SLC450’s digital input is compatible with
HDMI inter face. The connection type is “full sized”.
*Some smartphones require video out capabilities to be displayed with the SLC450. Check with your phone manufacturer.
Connecting to Digital Input Video Devices
Step 1:
Connect one end of the Digital Input Cable to your device’s Digital Input
port.
Step 2:
Connect the other end of the Digital Input Cable to your SLC450’s Digital
Input port.
Step 3:
In the Main Menu, select the “HDMI” Icon. Your SLC450 should now be mirroring
the content from your device.
Note:
If you’re connecting to a computer or laptop and the projector does not
automatically mirror it, read onto the next page for more information.
Connecting to a Computer via Digital Input
Step 4:
After connecting your projector to your computer or laptop via a digital
input cable, you may need to enabe Digital Video output on your computer. To
enable Digital Video output on your computer most computers require “turning
on” the video output feature. Each computer is different. Please consult your
owner’s manual for instructions to enable Digital Video output. Below are
standard instructions for a Windows 10 computer — not all systems are the
same.
Step 5: Press Windows+P to toggle through display settings. Select either “Duplicate” or “Extend” depending on your viewing option.
*NOTE: Different operating systems may differ
Step 6:
- Right click on computer desktop and select “Screen Resolution.”
- Display Properties window will pop up and select the Advance Display Settings.
- Please make sure the “Multiple displays” has the “Duplicate these displays” option selected and the Resolution is 1920 x 1080 or below as pictured in the red box.
- If the image is blurry or the text is not legible, adjust the screen resolution.
Chapter 4 Settings Menu
The Settings Menu can be accessed by selecting “Settings” on the Main
Menu.
Within the settings menu, there are eight
more submenus that allow you to customize your SLC450 to the settings you
want:
Brightness|
---|---
• Eco| Bluetooth
• Standard| Backup/Reset
• Boost| About
Wireless (Wifi Menu) Advanced
- Boot Signal Input
- Boot APP
- Power-on Mode
- Key Tone
- Screen Saver
- Screensaver Timeout Shutdown
- HDMI control
Language Display
- Projection Mode
- Zoom In / Out
- Keystone Correction
- Vertical Correction
- Horizontal Correction
- Corner Correction
- Keystone Correction Reset
Advanced Settings
In the Advanced setting menu, you can set up:
- Boot Signal Input: Off, USB, HDMI
- Boot APP: Off, Air Pin (PRO), Netflix, AirScreen, Disney+, Prime Video, WPS Projector, App Store, Multimedia Player, Settings, Bluetooth Speaker, YouTube, Android Mirroring, Browser
- Power-on Mode: Power-on Standby,Power-on
- Key Tone: Off, On
- Screen Saver:5 mins, 10 mins, 20 mins, 30 mins, 45 mins, 1 hour, Off
- Screensaver Timeout Shutdown:Off, 15 mins, 30 mins,45 mins,60 mins,75 mins,90 mins,120 mins
- HDMI Control
Language
In the Language Settings menu, you can
select your preferred language
Display Settings
In the Display setting menu, you can set up:
- Projection Mode
- Zoom In / Out
- Keystone Correction
- Vertical Correction
- Horizontal Correction
- Corner Correction
- Keystone Correction Reset
Keystone & Projection Direction
- Front Table
- Rear Table
- Rear Ceiling
- Front Ceiling
Keystone Correction
Keystone Correction
- The SLC450 features 4-way adjustable keystone.
- To adjust Keystone go to Settings→Display→Keystone Correction.
• Basic Keystone correction can be done by adjusting “Vertical Correction” or “Horizontal Correction”.
• For Complex Keystone Correction, select “Corner Correction”. Corner Correction is adjusted by selecting each corner of the screen and adjusting the X or Y coordinate. The adjustments will push or pull the screen at each corner along the X or Y axis.
Keystone Correction
Corner Correction Instructions：Press the OK key to navigate to the four corners. Then use the Up, Down, Left, and Right keys to make adjustments. Press the OK key to move to the next corner and continue the process.
Bluetooth Menu
How to connect the SLC450 to bluetooth
for audio out
- In the Settings Menu, go to the Bluetooth menu by selecting the bluetooth icon
- In the Bluetooth submenu, toggle the ” On / off ” switch to ” On”
- Select the desired bluetooth device. Make sure that your device is not connected to any other devices and it is placed near the SLC450.
- Note: Bluetooth is for audio output only – does not accept audio input or video streaming
Backup/Reset Menu
How to reset the SLC450
- In the Settings Menu, go to the Backup/Reset menu by selecting the Backup/Reset icon
- In the Backup/Reset menu, you can Reset the SLC450.
About Menu
How to view SLC450 “About” information
- In the Settings Menu, go to the About Menu by selecting the about icon
- In the About menu, you can see Model,System Version,Android Version,RAM,ROM,MAC Address,WiFi MAC Address,System Temperature,Online Update,Local Upgrade.
Technical Details
Troubleshooting
I cannot connect my iOS devices to the SLC450
| Possible Causes | Solution |
|---|---|
| (For wired connection) Incorrect cables or con- nectors | To connect your iOS |
devices to the SLC450, please use the Official Apple Lightning to Digital AV Adapter and connect via the Digital AV port.
AIRPLAY DOES NOT WORK
Be sure to connect your iOS device and the SLC450 Projector to the same WiFi
network.
Choose “AAXA SLC450” as the device you wish to screen mirror from your iOS
device, unless you have changed the SLC450’s nickname.
I cannot wirelessly screen mirror Netflix, Amazon Prime, Disney Plus, etc.
| Possible Causes | Solution |
|---|
For wireless connection. DMCA content including Netflix, Amazon Prime, Disney Plus content is not sharable wirelessly).| Please use the built-in apps to stream DMCA Content or connect your devices to the SLC450 using the proper cables/ converters.
IMAGE IS BLURRED
| Possible Causes | Solution |
|---|---|
| The Projector is not in focus. | Adjust the focus with the focus adjustment |
buttons on the remote control until the image comes into focus, or use the
focus adjustment buttons on the side of the projector
The Projector is offset from plane / angle of operation.| Move the projector
so that it is both 180 degrees and on an evern plane with the screen or adjust
the keystone through the remote, keypad or Settings Menu
NO SYNC, NO SIGNAL
Be sure to setup the computer to enable a video signal output. On some
laptops this is done by pressing and holding Function F5 key. If using the
SLC450 as an external monitor on Windows based systems, this can be done by
selecting “extend my desktop to this monitor”. Depending on the video driver
different resolutions may need to be selected for proper output.
THE PROJECTOR DOES NOT TURN ON
| Possible Causes | Solution |
|---|---|
| There is no power. | Check to ensure the power outlet source is good. Check the |
power adapter to ensure a proper con- nection with the wall outlet as well as
the projector.
Cannot power on the projector from the remote control.| To power on the
projector , Press the switch on the back of the projector. Next , if the
projector is not powered on , press the Power button on the remote control.
NO PICTURE / FILE NOT SUPPORTED
| Possible Causes | Solution |
|---|---|
| There is no power. | Check to ensure the power outlet source is good. Check the |
power adapter to ensure a proper con- nection with the wall outlet as well as
the projector.
Cannot power on the projector from the remote control.| To power on the
projector , Press the switch on the back of the projector. Next , if the
projector is not powered on , press the Power button on the remote control.
Projector not charging
| Possible Causes | Solution |
|---|---|
| There is no power. | Check to ensure the power outlet source is good. Check the |
power adapter to ensure a proper con- nection with the wall outlet as well as
the projector.
The projector is not set to the “OFF” Mode.| Connect the power cord to the
SLC450 . Connect the other end of the power cord into the wall power source
.Press the switch on the back of the projector.
Specifications
| Brightness: | 450 LED Lumens (Boost Mode) |
|---|---|
| Native Resolution: | 1920×1080 (1080p) |
| Contrast Ratio: | 1000:1 |
| Aspect Ratio: | 16:09 |
| Projection Lens: | Manual Focus |
| Image Size: | 10 – 180 inches” |
| Light Source: | Luminus 30,000 Hour LEDs |
| Video in: | HDMI 1080P & 4K 30 FPS Supported |
iOS and Android wireless mirroring (MiraCast)
File Play Back| USB Memory Stick Reader (up to 64GB)
Micro SD/TF Card Reader (up to 64GB)
Network Drive (with WIFI)
Audio Output:| Stereo speaker / headphone mini-jack
Bluetooth 5.0 Compatible
USB Power Output:| 5V 1A
Operating System:| Android 9.0
USB:| Full Sized USB A (2.0)
Power Consumption:| 30 Watts (Boost)
Dimensions:| 5 in x 4 in x 1.5 in
Weight:| 12 oz
Supported File Formats:| XLS, PDF, DOC, PPT, MP3, WMA, OGG, WAV, JPG, AVI,
BMP, GIF, JPG, TXT
Wireless Mirroring:| Supports iOS, Android
Bluetooth Output:| 5.0 Supported
Wirless (WiFi)| 2.4ghz/ 5 ghz
Notes ———
*HDMI™ is a registered trademark of HDMI! Licensing LLC. AAXA Technologies is not affiliated with HDMI Licensing LLC.
Please direct all customer service inquiries to:
AAXA Technologies, Inc.
17781 Sky Park Circle, Suite #F
Irvine, CA 92614
714-957-1999
info@aaxatech.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>