VENTION VWS-E47 Wireless Bluetooth Earbuds User Manual

VENTION VWS-E47 Wireless Bluetooth Earbuds

Introduction

Vention’s Open Ear Headphones feature a fully open-ear design, allowing the earbuds to rest comfortably and securely atop your ears. Vention prioritizes a true “nothing-in-your-ear” experience, aiming to provide superior sound in a natural and comfortable manner.

Specifications

• Model: NBP
• Bluetooth version: Bluetooth 5.3
• Material: ABS
• Headphones battery capacity: 70mAh/0.27Wh
• Headphone input power: 5V 50mA
• Charging case battery capacity: 400mAh/1.48Wh
• Charging case input power: 5V 400mA
• Charging case interface: USB-C

At a Glance

Headphone Controls

Power on

• a. The headphones power on automatically when removed from the charging case.
• b. When powered off, press and hold the MFB (Multi-Function Button) on either the left or right headphone for 3 seconds. The indicator light will illuminate white for 1 second, and the voice guidance will say, “Power on.”

Pairing and connection

1. Headphones are ready to pair right out of the charging case.
   Note: Upon first use, the headphones pair by default. If not connected, double-tap a single headphone or reset to enter pairing mode manually. You’ll hear a voice quidance when the nairina is successful.

2. Open the Bluetooth menu on your device. In the list of discovered Bluetooth devices, tap or click your Vention 011. You will hear the voice guidance say, “Connected”.

Power off

Auto power off

• a. The headphones will automatically power off after 5 minutes of not being connected.
• b. The headphones will automatically power off after 5 minutes without connection while in low battery.

Manual power off

• a. The headphones automatically power off when placed back in the charging case.
• b. When it is connected and not playing any content, press and hold either the left or right MFB (Multi-Function Button) for 3 seconds until you hear “power off.”

Phone mode

For more interesting information and events, please follow us on social media platforms:

• Website: www.ventiontech.com
• Email: vention@ventiontech.com

Using the voice assist function

When the phone is on standby or playing music, tap the multi-function button 3 times (left) to activate or stop your voice assistant.

About the indicator

• Low battery: The indicator flashes 6 times in blue, followed by four red light flashes, and then turns off.
• During charging: The indicator repeatedly flashes in red at about 1-second intervals. The indicator lights up in red after charging is complete.
• When charging the headphones: The indicator lights up in blue. The indicator turns off after charging is complete.

For warranty service or support, please contact Vention team:

Clear the headphones device list

When the headphones are powered on (and the device’s Bluetooth function is turned off), tap the multi-function button 5 times to clear the Bluetooth devices list.

Important safety instructions

Please read all instructions and warnings before using this product. Inappropriate use will cause damage to the product or personal safety.

1. Do not expose products containing batteries to excessive heat (e.g., from storage in direct sunlight, fire, or the like); do not store this product in high temperature, strong light, and strong magnetic field environment; do not place it in other harsh environments such as fire source, If your earbuds ever go into the water, please dry it naturally before using.
2. Improper use of the product can easily cause product damage or may endanger personal and property safety.
3. If consumers violate the product instructions and use them improperly, the company will not bear any consequences or legal liability for personal and property damage.
4. Non-professionals are strictly forbidden to disassemble this product.
5. Use this product only with an agency-approved power supply that meets local regulatory requirements.

Declaration on toxic or hazardous substances and elements contained in electronic products

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE 3: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FCC ID: 2A7Z4-NBP

Contents **

**

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>