BenQ Interactive Flat Panel RP8602 Instructions

**BenQ Interactive Flat Panel RP8602 Instructions

**

Disassembly Tools

nosed pliers|
Diagonal Cutting Pliers|

Slotted screwdriver|

Six Point Sockets|

Philips Screwdriver for M2.5 screw|
knife|

Disassembly process

Dismantle 4 pieces of M8 x 20mm P head flat tail ,elastic pad black galvanized machinery screws.|

---|---
Dismantle 3 pieces of M3 × 6mm meson head nickel plating mechanical screws.|

Dismantle 16 pieces of M3 × 6mm meson head nickel plating mechanical screws.|

---|---

1. Dismantle 15 pieces of    M4 × 6mm flat round head nickel plating mechanical screws.
2. Open the back cover.

|

1. Dismantle 3 pieces of M4 × 6mm flat round head nickel plating mechanical screws.
2. Dismantle 1 piece of Ф4 x 5 mm round head toothed pads blue zinc plating machine screw.

|
3. Remove the AC bracket.|
---|---

1. Dismantle 8 pieces of M3 × 6mm meson head nickel plating mechanical screws.
2. Dismantle 7 pieces of M4 × 6mm flat round head nickel plating mechanical screws.
3. Remove the back shell at the bottom.

|

1. Dismantle 2 pieces of M4 × 6mm flat round head nickel plating mechanical screws.
2. Remove the IO baffle.

|

1. Dismantle 3 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws.
2. Remove the USB board.

|
---|---

1. Dismantle 4 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws.
2. Remove the MIC board.

|

1. Dismantle 3 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws.
2. Remove the OPS board.

|

---|---

1. Dismantle 4 pieces of M5 × 8mm meson head black galvanized mechanical screws.
2. Separate the EVA pad from the sound.

|

1. Dismantle 7 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws.
2. Remove the motherboard.

|

1. Dismantle 6 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws.
2. Remove the power panel.

|

---|---

1. Dismantle 2 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws.
2. Dismantle 2 pieces of M3 × 4mm meson head nickel plating mechanical screws.
3. Remove the OPS iron bracket.

|

1. Dismantle 3 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws.
2. Remove the iron support.

|

1. Dismantle 3 pieces of M3 x 5mm flathead flat tail blue zinc plating machinery screws.
2. Remove the iron support.

|

---|---

1. Dismantle 4 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws.
2. Remove the horn bracket.

|

1. Dismantle 3 pieces of M4 × 6mm flat round head nickel plating mechanical screws.
2. Remove the IO baffle.

|

1. Dismantle 3 pieces of M3 × 8mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws.
2. Remove the shielding can.

|

---|---

1. Dismantle 8 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws.
2. Remove 8 plastic buckles.

|

1. Dismantle 6 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws.
2. Remove 6 rear shell supports.

|

1. Dismantle 10 pieces of M3 × 8mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws.
2. Remove aluminum profile assembly.

|
---|---

1. Dismantle 2 pieces of M3×3mm H =11mm flat tail Blue zinc plating machinery hexagon studs.
2. Dismantle 4 pieces of M3×2.5mm H =5mm flat tail Blue zinc plating machinery hexagon studs.

|

Disassembly Time

Total time: about 35 minutes

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>