Infinix HOT 40 X6836 Smart Phone User Manual

June 1, 2024
Infinix

Infinix HOT 40 X6836 Smart Phone

Infinix-HOT-40-X6836-Smart-Phone-product

Product Specifications

  • Model: Infinix HOT 40 X6836
  • Operating System: AndroidTM
  • Front Camera
  • Side Fingerprint Sensor
  • NFC Support

Product Usage Instructions

1. SIM/SD Card Installation

  1. Power off the mobile device.
  2. Refer to the provided diagram for SIM/SD card installation.

2. Charging the Phone

You can charge your device using the provided charger or by connecting it to a computer using the USB cable included with the phone. It is recommended to only use the INFINIX charger and cables to avoid damaging the device, which could invalidate the warranty.

3. FCC Caution

Labelling Requirements:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Information to User:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Specific Absorption Rate (SAR) Information:

This mobile phone meets the government’s requirements.

Frequently Asked Questions

  • Q: Can I use any charger to charge my device?
    • A: It is recommended to only use the INFINIX charger and cables provided with the phone. Using other chargers or cables may damage the device and void the warranty.
  • Q: How can I install a SIM or SD card on this device?
    • A: To install a SIM or SD card, power off the device and refer to the diagram in the user manual for guidance on installation.

Explosion diagram specification

Infinix-HOT-40-X6836-Smart-Phone-fig \(1\)

1 FL(CTP+LCM) 2 REC DECO
3 F HSG ASM 4 R CAM 50M
5 F CAM 32M 6 R CAM 2M
7 REC 8 R CAM 8W
9 PCBA MB 10 COAXIAL CABLE
11 FP FPC MYLAR 12 SIM CARD HOLDER
13 PS RUBBER 14 PCBA COPPER A
15 MAIN WATERPROOF FRAME 16 PCBA GRAPHITE FILM
17 R CAM CON FOAM 18 MAIN WATERPROOF MYLAR
19 R CAM CON FABRIC 8W 20 MI HOUSING
21 SCREW L3.5 22 BAT COVER ASM
23 R CAM DECO PC 24 R CAM DECO PMMA
25 R FLASH DECO 26 R CAM RUBBER 8W
27 R CAM LENS 50M 28 R CAM LENS 2M
29 R CAM LENS 8W 30 SCREW L2.0
31 EARPHONE RUBBER 32 USB RUBBER
33 R CAM FRAME 2M 34 PCBA COPPER C
35 PCBA SUB 36 PCBA COPPER B
37 MOTOR LINEA 38 SPK
39 BATTERY 40 FPC SIDE KEY
--- --- --- ---
41 SIDE FP 42 MAIN FPCA

Know your phone

Infinix-HOT-40-X6836-Smart-Phone-fig \(2\)

  1. Front camera
  2. Volume + key
  3. Volume – key
  4. Power key & side fingerprint sensor
  5. NFC

SIM/SD card installation

  1. Power off mobile.
  2. Refer to the following picture for SIM / SD card installationInfinix-HOT-40-X6836-Smart-Phone-fig \(3\)

Charging the phone

You can charge your device using a charger or by connecting it to the computer using a USB cable (comes with the phone). Use only INFINIX charger and cables. Other chargers or cables may damage the device. This will invalidate your phone warranty.

Infinix-HOT-40-X6836-Smart-Phone-fig \(4\)

FCC Statement

Labelling requirements

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Information to user.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Information to the user.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) information:

This mobile phone meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: X6836(FCC ID:2AIZN-YYS-X6836) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 1.15 W/kg and when properly worn on the body is 0.57 W/kg.

Body-worn Operation

This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 1.0 cm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.

  • Operating System: AndroidTM Android is a trademark of Google LLC.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals