ICP DAS PET-7200 PoE Ethernet i/O Module User Manual
- June 6, 2024
- ICP DAS
Table of Contents
ICP DAS PET-7200 PoE Ethernet i/O Module User Manual
What’s in the Box?
-
PET-7200/ET-7200 Module
-
Quick Start
Factory Default Settings
Network Connection
|
Default
|
Authentication
| Default
---|---|---|---
IP Address:
|
192.168.255.1
|
User name:
| Admin
Subnet Mask:
|
255.255.0.0
|
Password:
| Admin
Gateway:
|
192.168.0.1
| |
Connecting to Network, Computer and Power
-
Non-PoE
-
PoE
Assigning a Valid IP Address – Method 1
-
Install eSearch from
http://ftp.icpdas.com/pub/cd/6000cd/napdos/software/esearch/ -
Launch eSearch and click “Search Server”
-
Double-click the name for your module on the list
-
Enter the network configuration and click “OK”
-
Repeat Step 2. to search the module again
To make sure your modifications take effect.
Assigning a Valid IP Address – Method 2
-
Set the IP configuration on your computer
The ET-7200 module comes with the default IP address of 192.168.255.1, you must chose an IP address for the computer in the range of 192.168.255.2 – 192.168.255.253 that is not in use. -
Launch your web browser to go to the ET-7200 web interface
Enter the factory default IP address 192.168.255.1 for the ET-7200 as the URL in browser and press Enter.
-
Fill out the User name and Password
Fill out the factory default user name and password “Admin” and then click “OK”. -
Assign a valid IP address for your ET-7200 module
-
Click “Configuration”
-
Click “Network Settings” in the sub-menu
-
Enter a valid IP address for your ET-7200 module.
-
Click the “SUBMIT” button.
-
Restore the original IP address to your computer
Logging in to the ET-7200 Module
- Enter the new IP for the ET-7200 as the URL in browser
- Fill out the User name and Password “Admin” again
- Welcome to ET-7200 web site
Supported Products
- ET-7200 Series
- ET-7200-UT Series
- PET-7200 Series
Technical Support
PET-7200 / ET-7200 User Manual
http://ftp.icpdas.com/pub/cd/6000cd/napdos/et7000_et7200/document/