GOAL ZERO Light Life 350 LED Light User Guide
- June 6, 2024
- GOAL ZERO
Table of Contents
LIGHT LIFE™350
LED LIGHT
USER GUIDE
TECHNICAL SPECIFICATIONS
Runtimes:
Yeti 400 Lithium
Yeti 1400 Lithium
Yeti 3000 Lithium| 85 Hrs
300 Hrs
650 Hrs
---|---
Light: (output)
LED High Brightness:
LED Low Brightness:| 5W warm white Cree LED
4.5W, 350 Lumens
1.2 W, 100 Lumens
---|---
| Input: (6mm barrel jack) | 12V, 0.4A (4.5W max) |
|---|
General:
| Chainable | yes |
|---|---|
| Weight | 9.3oz (264g) |
| Dimensions (compact) | 2.8 x 3.2in (71 x 80mm) |
| Dimensions (extended) | 4.9 x 3.2in (125 x 80mm) |
| Operating usage temp. | 0-120 F (-17-48 C) |
| Certs | |
| Warranty | 12 months |
Be sure to register your product at goalzero.com/support
GET TO KNOW YOUR GEAR
HOW IT WORKS
Your Light-a-Life LED light can power from a Goal Zero Yeti Portable Power
Station or from a Sherpa Power Bank using a USB to 6mm adapter (SKU:98101).
1. Insert the green plug into a 6mm 12V port on a Sherpa Power Pack or Yeti
Solar Generator. Ensure the 12V port on your power source is turned on.
2. Use the power switch on top of the Light-a-Life to turn it on. Toggle
between high and low settings by moving the switch left or right.
3. Hang with the carabiner or attach to a metal surface with the magnets.
You can also power the Light-a-Life from a 12V car port using the included
adapter. Simply plug the Light-a-Life’s blue connector into the matching end
of the 12V adapter.
Unexpected rainstorms probably won’t harm it.
Ready for Outdoor Use: The Light-a-Life has been engineered to withstand the
elements, including rain and snow. Although it’s tough enough to withstand a
storm, the Light-a-Life should not be submerged in water and all ports/plugs
should be dry before turning on or chaining.
CHAINING
You can chain up to 8 Light-a-life together.
- Begin chaining with the first light in your string that will plug into your Sherpa Power Pack or Yeti Solar Generator.
- Tug slightly on the green covering over the chaining port to expose the chaining port.
- Insert the green plug from another Light-a-Life into the chaining port.
- Continue on with the remainder of the lights in your string.
WARNING: While in use, the metal neck of the Light-a-Life will become hot to the touch. It is still safe to wrap the cable around the metal neck while in use.
AREA LIGHT
For broad, bright light, use the Light-a-Life in its area light mode. This is a great mode for outdoor use and how the Light-a-Life is shipped in packaging.
-
While holding the shade in one hand, grasp the top of the light with your second hand and twist counter-clockwise. Slide the shade off
to remove it. -
With the shade off, determine your desired cable length. Adjust cable length by pushing the button on the carabiner and sliding the cable through.
a. Store excess cable by wrapping it around the metal neck of the Light-a-Life.
b. Use the cable catch hook to set length.
- With the notches of the shade touching your palm, slide the shade over the wrapped cable.
- Line up shade notches with the bottom of the light.
- Lock the shade in place by turning the top of the light clockwise.
LANTERN LIGHT
For soft, ambient light, use the Light-a-Life in its lantern mode. This is a great mode for indoor use.
- While holding the shade in one hand, grasp the top of the light with your second hand and twist counterclockwise. Slide the shade off to remove it.
- With the shade off, determine your desired cable length. Adjust cable length by pushing the button on the carabiner and sliding the cable through.
a.Store excess cable by wrapping it around the metal neck of the Light-a-Life.
b. Use the cable catch hook to set length.
- Flip the shade around so the notches are touching the light. Line up the shade notches with the bottom of the Light-a-Life.
- Lock the shade in place by turning the top of the light clockwise.
GOAL ZERO HEADQUARTERS
675 West 14600 South
Bluffdale, UT 84065
1-888-794-6250
Designed in the U.S.A.
Made in China
Goal Zero Yeti, Light-a-Life, and Sherpa are trademarks of Goal Zero.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.
CL080321V1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>