GOAL ZERO 98350 Yeti X 230 WATT Power Supply User Guide

: June 6, 2024
: GOAL ZERO

Table of Contents

Get To Know Your Gear
How it Works
Technical Specifications
Frequently Asked Questions
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

230 WATT
POWER SUPPLY
USER GUIDE

IMPORTANT SAFETY INSTRUCTIONS

Use only with Yeti X Lithium Portable Power Stations 1000X, 1500X, 3000X, 6000X

Working temperature -20 C to 40 C
Approved by CE FCC UL RoHS certifications
Short Circuit, Over Voltage, and Over Current Protection Built-in
DO NOT disassemble or attempt to repair the module
Please unplug when not in use
Avoid exposure to rain or moisture to reduce the risk of product damage or electric shock
Keep this product out of the reach of children
Use original AC cable
Use within space large enough to facilitate heat dissipation to extend the life of the power supply

Get To Know Your Gear

How it Works

Charge your Yeti 1000X/1500X even faster with our Yeti X 230W Power Supply. CAUTION: This 230W power supply is designed exclusively for our Yeti X line to improve charge time, and can not be used for Yeti Lithium or Yeti Lead Acid power stations.

Replacement Power supply for Yeti 3000X.
Connect AC Wall Plug into the Power Brick.
Plug AC connection into a standard wall outlet. The indicator light should be active.
Connect Red and Black High Power Port (HPP) connection into the High Power Port (HPP) input on your Yeti X Power Station.
You will see the blue input indicator light active on your Yeti.

Technical Specifications

General:

Frequently Asked Questions

Why is my power supply hot?
The heat is normal and can reach temperatures up to 140 Degrees Fahrenheit (60 Degrees Celsius). This is caused by the change in voltage from AC to DC voltage.
Why is my power station not charging?
Please double check all connections are firmly plugged in. The Yeti Power Stations have built-in overcharge protection. It is possible your unit is fully charged or close to a full charge. We would recommend confirming the functionality at a lower battery level < 80%.

GOAL ZERO HEADQUARTERS
675 West 14600 South
Bluffdale, UT 84065
Designed in the U.S.A.
Made in China
1-888-794-6250
Goal Zero Switch and Nomad are trademarks of Goal Zero LLC.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

GOALZERO.COM
CA031215 CL083121V1

Documents / Resources

| GOAL ZERO 98350 Yeti X 230 WATT Power Supply [pdf] User Guide
98350, Yeti X 230 WATT Power Supply, 98350 Yeti X 230 WATT Power Supply, 230 WATT Power Supply, Power Supply
---|---