QAZQA A03525 Farmhouse Chandelier for Dining Rooms Instruction Manual

: June 1, 2024
: QAZQA

Table of Contents

QAZQA A03525 Farmhouse Chandelier for Dining Rooms
Product Information
Product Usage Instructions
IMAGE FOR FINISHED PRODUCT
PARTS TYPE & QTY INCLUDING
ACCESSORIES & QTY ENCLOSED
ASSEMBLY & INSTALLATION INSTRUCTIONS
CLEANING
ORDERING PARTS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

QAZQA A03525 Farmhouse Chandelier for Dining Rooms

$QAZQA-A03525-Farmhouse-Chandelier-for-Dining-Rooms-FIG- $1$$

Product Information

Specifications:

Parts Included: Single bar, Green ground screw, Canopy, Collar ring, Collar loop, Quick link, Chain, Loop, Fixture loop assembly, Arm, Glass, Socket, Wood ring
Accessories Included: Wire connector, Mounting screw

Product Usage Instructions

Assembly & Installation:

Remove the fixture from the carton and ensure all parts are included.
Step A1: Determine the correct chain length needed for hanging height and disconnect the excess chain.
Step A2: Connect the loops on the wood ring and arm using the quick link. Attach the chain to the loop on the top end of the loop assembly.
Step A3: Lace wires through the chain while ensuring snugness.
Turn off Power: Switch off electricity at the main fuse or circuit breaker.
Make Installation:
Step B1: Attach the single bar to the outlet box and unscrew the collar ring from the collar loop.
Step B2: Secure the canopy over the mounted collar loop and adjust height if needed.
Step B3: Pass the canopy and thread ring over the chain.
Step B4: Attach a quick link to connect the loop and pass wires through screw collar loop.
Step B5: Cut off excess wire length if needed.
Step B6: Make wire connections as per the wiring diagram provided.

Frequently Asked Questions (FAQ) :

Q: Do I need to hire an electrician for installation?
A: It is recommended to have a licensed electrician handle the installation for safety reasons.
Q: How do I adjust the hanging height of the fixture?
A: Follow Step B2 in the installation instructions to adjust the height by moving the canopy and collar loop accordingly.

WARNING (To reduce the risk of fire, electric shock, or injury to persons):

We suggest installation by a licensed electrician.
Please read the instructions carefully and save it as you may need it at a later time.
Before you start, NEVER attempt any work without shutting off the electricity until the work is done. A). Go to the main fuse, or circuit breaker, box in your home. Place the main power switch in the “OFF” position. B). Place the wall switch in the “OFF” position.
The mounting surface should be clean, dry, flat, strong enough and 1/4” larger than the canopy on all side. Any gaps between the mounting surface and canopy exceeding 3/16” should be corrected as required.
Make sure that the ceiling or wall can stand the weight of the lamp before the fixture.
Make sure the voltage you are using is 120V. The maximum wattage is Type A, Max 60W per bulb.
Keep the lamp away from acidic and basic objects in case of damaging the surface of the lamp.
When replacing the bulb, you should turn off or unplug the lamp and you must wait until it is cool as bulbs get hot quickly.
The safety instructions appearing in this manual are not meant to cover all possible conditions that may occur. It must be understood that common sense, caution and care must be used with any electrical products.

IMAGE FOR FINISHED PRODUCT

$QAZQA-A03525-Farmhouse-Chandelier-for-Dining- Rooms-FIG- $1$$

TOOLS REQUIRED (NOT INCLUDED):
Before doing assembly and installation please prepare the needed tools as below picture $QAZQA-A03525-Farmhouse-Chandelier-for-Dining-Rooms-FIG- $4$$

PARTS TYPE & QTY INCLUDING

$QAZQA-A03525-Farmhouse-Chandelier-for-Dining- Rooms-FIG- $3$$

(C) Single bar (1)
(D) Green ground screw (1)
(E) Canopy (1)
(F) Collar ring (1)
(G) Collar loop (1)
(H) Quick link (8)
(I) Chain (1)
(J) Loop(13)
(K) Fixture loop assembly (1)
(L) Arm (3)
(M) Glass (6)
(N) Socket (6)
(O) Wood ring（1）

ACCESSORIES & QTY ENCLOSED

(A) Wire connector (3)
(B) Mounting screw (2)

ASSEMBLY & INSTALLATION INSTRUCTIONS

Carefully remove the fixture from the carton and check that all parts and accessories are included as shown in the above illustration.
Make pre-installation $QAZQA-A03525-Farmhouse-Chandelier-for-Dining-Rooms-FIG- $4$$
Step A1: By measuring, determine the correct number of links needed for proper hanging height. Using the chain pliers, disconnect and discard the remaining cha i n .
Step A2: Open the quick link (H) to connect the loops (J) on the Wood ring (O) and arm (L). Close the quick link (H).
Step A3:Attach the quick link (H) to connect the chain (I) and the loop on the top end of loop assembly (J).
Carefully lace the wires through the chain (I) (every other link) and stop just before you reach the top of the chain (I).
Gently pull the wires till snug.
Turn off power
Before you start to make an installation, NEVER attempt any work without shutting off the electricity until the work is done.
- A). Go to the main fuse, or circuit breaker, box in your home. Place the main power switch in the “OFF” position.
- B). Place the wall switch in the“OFF” position.
Make installation $QAZQA-A03525-Farmhouse-Chandelier-for-Dining-Rooms-FIG- $5$$
Step B1: Remove the threaded ring (F) from collar loop(G). Attach the single bar (C) to outlet box with mounting screws (B). The side of the single bar marked “GND” must face out, Unscrew the collar ring (H) from the collar loop.
Step B2: Pass canopy (E) over the mounted collar loop (G) then secure with threaded ring (F) to test the height. Unscrew the threaded ring (F) from the collar loop (G) and remove the canopy (E).
Note : The canopy (E) should be snug against the ceiling and the collar loop (F) should be screwed enough threads (no less than 6 threads )over the threaded nipple for more secure hanging .If not, adjust the height of nipple and collar loop (G) until the desired height is reached. Remove the threaded ring (F) and canopy (E) and place to the side.
Step B3: Slip the threaded ring(F) over the chain(I), then do the same with the canopy(E).
Step B4: Open the quick link(H)，attach the quick link (H) to connect the loop (G). Close the quick link(H)
Pass the wires through the screw collar loop(G) to the top of the nipple and gently pull till snug.
Step B5: If needed, cut off the wires length of the fixture. At this point, the remaining wire length measured from the top single bar(C) is at least 6″.
Step B6: Make wire connections
Connect wires as below wires connecting shown. TAKE NOTE OF YOUR WIRE
COLOR OF FIXTURE , NEVER CONNECT WIRE TO GROUND WIRE
Connect ground wire according to the below chart $QAZQA-A03525-Farmhouse- Chandelier-for-Dining-Rooms-FIG- $6$$
Connect wires according to the below chart $QAZQA-A03525-Farmhouse-Chandelier- for-Dining-Rooms-FIG- $7$$
Twist the plastic wire connector until wires are tightly joined together,wrap each connector with approved electrical tape.Be sure that no wire strands are exposed and then carefully tuck all wires into the outlet box . Step B7: Raise canopy (E) to ceiling and secure canopy (E) in place by tightening threaded ring (F) onto collar loop (G). Step B8: Gently and carefully position glass (M) and onto the socket (N). Install the bulb (not included) (Please do not exceedthe maximum capacity recommended on the socket.)
5. Check everything are already installed properly, then you could turn on the light. Enjoy!

CLEANING

To clean, wipe the fixture with a soft cloth. Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.

ORDERING PARTS

Keep this sheet for future reference, and in case you need to order replacement parts. All parts for this fixture can be ordered from place of purchase. Be sure to use exact wording from illustration when ordering parts.