motorola MN007324A01 Trtra Modular Charger Instructions

: June 6, 2024
: Motorola

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS
OPERATIONAL SAFETY GUIDELINES
ADDITIONAL INFORMATION
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Motorola MN007324A01 Trtra Modular Charger Instructions

motorola MN007324A01 Trtra Modular Charger
Instructions

The complete Online User Guide is available at https://learning.motorolasolutions.com

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2020 Motorola Solutions, Inc. All rights reserved.

motorola MN007324A01 Trtra Modular Charger Instructions - Main
Product

CLASS B DIGITAL DEVICE
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT SAFETY INSTRUCTIONS

This document contains important safety and operating instructions. Please read these instructions carefully and save them for future reference.
Before using the battery charger, read all the instructions and cautionary markings on (1) the charger and (2) the battery.

To reduce risk of damage to the power cords, pull the plug rather than the cord when disconnecting from the AC outlet or the charger.
An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in risk of fire and electric shock. If an extension cord must be used, make sure that the cord size is 18 AWG for lengths of up to 6.5 feet (2.0 m), and 16 AWG for lengths up to 9.8 feet (3.0 m).
To reduce risk of fire, electric shock, or injury, do not operate the charger if it has been broken or damaged in any way. Take it to a qualified Motorola Solutions service representative.
Do not disassemble the charger. It is not repairable and replacement parts are not available. Disassembly of the charger may result in risk of electric shock or fire.
To reduce risk of electric shock, unplug the charger power supply from the AC outlet before attempting any maintenance or cleaning.
To reduce risk of injury, charge only the rechargeable Motorola Solutions Authorized Batteries listed in the Online User Guide (MN007338A01_). Other batteries may explode, causing personal injury and damage.
Use of accessories not recommended by Motorola Solutions may result in risk of fire, electric shock, or injury.
Changes or modifications made to this device, not expressly approved by Motorola Solutions, could void the authority of the user to operate this equipment.

OPERATIONAL SAFETY GUIDELINES

This equipment is not suitable for outdoor use. Use only in dry locations and conditions.
Maximum ambient temperature around the charger must not exceed 40 °C (104 °F).
Connect the charger only to an appropriate power supplies listed in the Online User Guide.
The AC outlet to which the power supply is connected must be nearby and easily accessible.
Ensure that the power supply cord connected to the charger is not easily stepped on, tripped over, or subjected to water, damage, or stress.
Connect the power supply cord only to an appropriately fused and wired AC outlet with the correct voltage, as specified on the product.
Disconnect from line voltage by removing the power supply from the AC outlet.
The equipment shall be connected to a nearby and easily accessible socket outlet.