Shenzhen Jiayz Photo Industrial MIC-F-RXDi Wireless Microphone User Manual

Shenzhen Jiayz Photo Industrial MIC-F-RXDi Wireless Microphone

Statement
Please read this manual carefully before use and operate and store in strict accordance with the instructions provided. Please retain for future reference.

Introduction

The MIC-F is an ultracompact and portable 2.4GHz wireless microphone system, delivering exceptional, high-quality sound. The system series is comprised of three different receivers. The MIC-F-RXDi receiver features a MFi certified Lightning output, designed for Apple iOS devices. The MIC-F-RXUC receiver features a USB-C output, allowing it to work with Android phones, tablets and other devices with a USB-C port. The MICF-RX35 receiver features a 3.5mm TRRS plug, compatible with smartphones, tablets, and more. With the supplied TRS adapter, it can also be used with DSLRs, camcorders, etc. The MIC-F-TX clip-on transmitter has a high-quality built-in mic. It is small and light enough to clip to shirts and clothing. With gain and mute controls, you are in total control of your sound. The MIC-F provides a great solution for live streaming, vlogging, mobile journalism, and more.

Features

•  2.4GHz wireless transmission technology
•  Ideal for live streaming, Vlogging, mobile journalism, and more
•  Delivers exceptional, high-quality sound
•  Portable charging case for easy charging
•  Operating range of up to 30m
•  Mute function & gain control
•  Ultracompact and easy to carry

Available Kits

Product Structure MIC-F-TX: Ultra-compact Clip-on Transmitter

•  Power/Mute/Pair Button
•  +/-Button
• Adjusts gain for microphone level input. If the maximum/minimum level is reached, the indicator will blink blue four times. The setting is retained even after the unit is powered off.
•  Built-in Microphone
•  Status Indicator
•  Charging Contacts
•  Belt Clip

MIC-F-RXDi: Ultracompact Receiver with Lightning Connector

•  Pair Button : Double-click the button to enter pairing mode.
•  Status Indicator
•  Lightning Connector: It can be connected to an iOS device.

MIC-F-RXUC: Ultracompact Receiver with USB-C Connector

•  Pair Button: Double-click the button to enter pairing mode.
•  Status Indicator
•  USB-C Connector: It can be connected to an Android phone, tablet or other USB-C devices

MIC-F-RX35: Ultracompact Receiver with 3.5mm TRRS Connector

•  Power/Mute/Pair Button
•  Status Indicator
•  3.5mm TRRS Connector: It can be connected to a smartphone, laptop, tablet or other devices with a 3.5mm TRRS jack.
•  Charging Contacts
•  Dual 3.5mm TRRS Female to 3.5mm TRS Male Adapter

Accessories Installation

•  Connect the MIC-F-RX35 to a smartphone, tablet, or other devices with a 3.5mm TRRS jack.
•  Connect the MIC-F-RX35 to a DSLR, camcorder, recorder or mother devices with a 3.5mm TRS jack

Note: Two MIC-F-RX35 can be connected to the adapter simultaneously

Charging Case

• Charging Contacts
•  Indicator Button
• Press to light up the indicator and display current battery level.
• Battery Level Indicator
• USB-C Charging Port

Operation Guide

For the MIC-F1/MIC-F2 kit

•  Press and hold the power button for 3 seconds to turn on the transmitter.
•  Plug the RXDi into an iOS device or the RXUC into a USB-C device.
•  Transmitter and receiver pairing Before leaving factory, the system is pre-paired. Therefore, the connection will be established once they are powered on. If they are disconnected, please follow the steps below:
  •  With the system powered on, double-click the Pair button of the receiver. The receiver indicator will flash rapidly in blue.
  •  When the receiver indicator flashes rapidly in blue, double-click the Power button of the transmitter to enter pairing mode. The transmitter and receiver will be paired within 10 seconds. Indicators of both will turn solid blue.
•  You are ready to record.

For the MIC-F3 kit

•  Press and hold the Power button for 3 seconds to turn on the transmitter and the receiver.
•  Transmitter and receiver pairing Before leaving factory, the system is pre-paired. Therefore, the connection will be established once they are powered on. If they are disconnected, please follow the steps below:
  •  With the system powered on, double-click the Power button of the receiver. The receiver indicator will flash rapidly in blue.
  •  When the receiver indicator flashes rapidly in blue, doubleclick the Power button of the transmitter to enter pairing mode. When paired successfully, the indicators will turn solid blue.
•  Connect the receiver to a smartphone, tablet, or other devices with a 3.5mm TRRS jack. Or use the supplied adapter to connect the receiver to a DSLR, camcorder, recorder or other devices with a 3.5mm TRS jack.
•  You are ready to record.

Note: Due to the 2.4GHz wireless frequency, the signal can be easily attenuated. Please try to avoid obstacles, such as walls and buildings, and avoid close proximity to devices with 2.4GHz signal, such as high-power wifi antennas, smartphones with wifi in use, radios, etc.

Charging Guide

• Please recharge the device when battery is low.
• Use the charging case to charge the transmitter/receiver.

Note:

•  The transmitter/receiver will automatically turn off after being placed in the charging case for 15 seconds.
•  The MIC-F-RXDi and MIC-F-RXUC receivers are directly powered by external devices.
• Use the supplied USB-C cable to charge the charging case

Specifications

• MIC-F-TX
• MIC-F-RXDi
• MIC-F-RXUC
• MIC-F-RX35

Charging case

Packing List

• MIC-F1
• MIC-F-TX Transmitter ×1
• MIC-F-RXDi Receiver ×1
• MIC-F1BOX Charging Case ×1
• USB-C Charging Cable ×1
• Fur Windshield ×1
• MIC-F2
• MIC-F-TX Transmitter ×1
• MIC-F-RXUC Receiver ×1
• MIC-F2BOX Charging Case ×1
• USB-C Charging Cable ×1
• Fur Windshield ×1
• MIC-F3
• MIC-F-TX Transmitter×1
• MIC-F-RX35 Receiver×1
• MIC-F3BOX Charging Case×1
• USB-C Charging Cable×1
• Dual 3.5mm TRRS Female to 3.5mm TRS Male Adapter×1
• Fur Windshield×1

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

•  This device may not cause harmful interference,
• this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>