Brydge Vertical Dock for MacBook Air (13-inch) User Manual
- June 6, 2024
- Brydge
Table of Contents
Brydge Vertical Dock for MacBook Air (13-inch)
ASSEMBLY
- Remove base, chassis, screws & screwdriver from packaging.
- Turn the chassis upside down.
- Place base so that it fits snugly to chassis & screw holes are aligned.
(Base plate only fits correctly in one orientation)
- Tighten the two screws.
- Flip dock over with Thunderbolt ports facing toward the back.
- Connect devices to the Thunderbolt 3 ports on the back of the Vertical Dock as you would with your MacBook ports.
NOTE: To use external displays
with the MacBook in the Vertical Dock, power must be connected, along with an
external keyboard/mouse.
INSERT & REMOVE
- INSERT: Gently insert your MacBook into the bottom of the black sleeve.
- SEAT: Push down until the Thunderbolt ports engage.
- REMOVE: Pull up and remove your MacBook.
PROPER USAGE
Dropping the MacBook into the Vertical Dock can damage the ports and dock
connectors. Forcing or wobbling the computer into or out of the dock could
result in port damage. Make sure that your grip on the computer is secure
before docking and undocking.
Do not insert upside down or backwards, this may result in port damage or
cosmetic damage to your MacBook. The MacBook should only be docked with the
left-side ports down and the monitor hinge to the rear of the dock.
Cosmetic wear to the surface finish may result from any device that plugs into
the MacBook, including the Vertical Dock. Minor wear around the MacBook’s
ports is considered normal.
WARRANTY
Thank you for purchasing a Brydge product. This product comes with a 1-year limited hardware warranty on the terms and conditions set out in this document and at www.brydge.com/warranty. All Brydge warranties are non-transferrable and are only available to the original end-user of the product. Warranties do not apply to products purchased from online vendors unauthorized to sell Brydge-branded product. If a defect arises during the warranty period, cease using the product and contact Brydge. To obtain warranty service, visit www. brydge.com/support or call +1 435-604-0481. Brydge, at its sole discretion and option, will (1) repair the product at no charge using new parts or parts that are equivalent to new in performance and reliability, or (2) replace or exchange the product with a product of equivalent functionality and value. Brydge offers free return shipping on any approved warranty claims. A shipping label will be provided to you if you are within the United States. If you are outside the United States, Brydge will reimburse your return shipping to a maximum of US$15.00 after providing a copy of the shipping receipt.
Australia Only: Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
Brydge Technologies LLC | 1912 Sidewinder Dr., Suite 104, Park City, UT 84060
USA
The Vertical Dock complies with part 15 of the Federal Communications Commission (FCC) rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including that which may cause undesired operation.
HAVE A QUESTION? Visit www.brydge.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>