Chroma-Q Pole Operated Pan & Tilt Unit User Guide
- June 6, 2024
- Chroma-Q
Table of Contents
- Before you start work
- Remove the slotted mounting block and retain
- Remove Space Force standard unit brackets (2)
- Fit slotted mounting block
- Fit pole operated unit
- Attach pole operated unit to the slotted mounting block
- Check screws are the secure and correct operation of pole operated unit
- Approvals & Disclaimer
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Step by Step Assembly Guide
Pole Operated Pan & Tilt Unit for Chroma-Q® Space Force onebytwo™
Part Number: CQ647-9020
For use with Space Force onebytwo™
Pole Operated Unit for Space Force onebytwo – Step by Step Assembly Guide V1.0
Before you start work
Parts and tools required:
Chroma-Q Space Force onebytwo pole operated unit.
8 x mounting block retaining screws – M4X25 hex socket cap.
Philips No. 2 screwdriver.
Hex key 6mm.
Hex key 3mm.
Remove the slotted mounting block and retain
Parts and tools required:
Hex key 6mm.
Remove Space Force standard unit brackets (2)
Parts and tools required:
Philips No. 2 screwdriver.
Important : protect the front screen of Space Force from damage.
Fit slotted mounting block
Parts and tools required:
4 x mounting block retaining screws.
1 x slotted mounting block.
Hex key 3mm.
Important: fit block to right-hand side when viewed from the back.
Tighten screws securely.
Fit pole operated unit
Parts and tools required:
4 x mounting block retaining screws.
1 x pole operated unit.
Hex key 3mm.
Important: fit block to the left-hand side when viewed from the back.
Rotate unit tube to access screw holes.
Tighten screws securely.
Attach pole operated unit to the slotted mounting block
Parts and tools required:
Hex key 6mm.
Important: rotate adjustment cup to engage mounting block slot. Tighten
screw securely.
Check screws are the secure and correct operation of pole operated unit
Parts and tools required:
Hex key 6mm.
Hex key 3mm.
Approvals & Disclaimer
The information contained herein is offered in good faith and is believed to
be accurate. However, because conditions and methods of use of our products
are beyond our control, this information should not be used in substitution
for customer’s tests to ensure that Chroma-Q products are safe, effective, and
fully satisfactory for the intended end-use.
Suggestions of use shall not be taken as inducements to infringe any patent.
Chroma-Q sole warranty is that the product will meet the Chroma-Q sales
specifications in effect at the time of shipment. Your exclusive remedy for
breach of such warranty is limited to refund of purchase price or replacement
of any product shown to be other than as warranted.
Chroma-Q reserves the right to change or make alterations to devices and their
functionality without notice due to ongoing research and development.
The Chroma-Q pole-operated pan and tilt unit has been designed specifically
for the lighting industry. Regular maintenance should be performed to ensure
that the product performs well in the entertainment environment.
If you experience any difficulties with any Chroma-Q products please contact
your selling dealer. If your selling dealer is unable to help please contact
[email protected]. If the selling dealer is
unable to satisfy your servicing needs, please contact the following for full
factory service:
Outside North America:
Tel: +44 (0)1494 446000
Fax: +44 (0)1494 461024
[email protected]| North America:
Tel: +1 416-255-9494
Fax: +1 416-255-3514
[email protected]
---|---
For further information please visit the Chroma-Q website at
www.chroma-q.com.
Chroma-Q is a trademark, for more information on this visit
www.chroma-q.com/trademarks.
The rights and ownership of all trademarks are recognized.
Pole Operated Unit for Space Force onebytwo
Step by Step
Assembly Guide V1.0