4iiii R8000 Dual Side Precision Pro Crankset with Powermeter User Guide
- June 6, 2024
- 4iiii
Table of Contents
4iiii R8000 Dual Side Precision Pro Crankset with Powermeter
GETTING STARTED
Tiiiip: Find the complete user manual online: 4iiii.com/support-and- documentation
- Install your 4iiii powermeter crankset and pedals following the manufacturer’s instructions.
- Wake up your 4iiii powermeter by rotating the crank 3 or 4 times.
Podiiiium: Wake Podiiiium up from shipping mode by plugging it into a power source for 5 seconds.
Tiiiip: Need more assistance? Go to 4iiii.com/support for FAQs and customer support.
CONNECT & CALIBRATE
Tiiiip: Zero your powermeter before riding in the environment and temperature you will be riding in!
3. Download the 4iiii app for iOS or Android for the complete
experience.
4. Pair your 4iiii powermeter with your power capable device.
5. Zero your 4iiii powermeter using your paired device. With the bike
upright and stationary, unclip pedals and position crank arms as shown. Select
“Zero offset” or “Calibrate” on your display.
Tiiiip: Be sure to update your firmware if prompted. We’re always making improvements and adding new features.
REGULATORY COMPLIANCE
FCC ID: ZZNPM100 Model: PM100
FCC ID: ZZNPX1Ø2 Model: PX102
FCC Statement: This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
The grantee is not responsible for any changes or modifications not expressly
approved by the party responsible for compliance. Such modifications could
void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction. NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Caution: If any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ISED Certification Number: 9896A-PX102, 9896A-PM100,
Model: PX102 PX102, PM100
Statement This device complies with Innovation, Science and Economic
Development Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device. CAN
ICES-3(B)/NMB-3(B)
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
FOR TECHNICAL SUPPORT PLEASE CONTACT YOUR 4iiii AUTHORIZED DEALER
4iiii Innovations Inc.
141 2 Ave E
Cochrane, Alberta Canada
T4C 2B9
Web: 4iiii.com/support
Email: [email protected]
Phone: 1.800.218.3095
Find the complete User Manual online:
4iiii.com/support-and-documentation
