4iiii Innovations 3 Plus Pro Precision Power Meter Installation Guide
- June 1, 2024
- 4iiii Innovations
Table of Contents
PRECISION 3+ PRO
POWERMETER
QUICK START GUIDE
FEATURES
| APPLE FIND MY
Offering the peace of mind in knowing where your power meter is.
---|---
| ACCURACY IN 3D
With +/- 1% accuracy, 4iiii is the only crank-based power meter to use 3
strain gauges to measure all forces in your pedal stroke.
| CYCLING METRICS
Get more data like pedal smoothness and torque effectiveness to analyze and
optimize your pedal stroke.
| BATTERY LIFE
With up to 550 hours of battery life, you won’t have to worry about changing
your batteries any time soon.
| AUTOMATIC TERRAIN SELECTOR
Detects the terrain you’re riding on for more responsive cadence and power
feedback/data. Ride the roads less traveled with confidence.
| LEFT RIGHT BALANCE
A dual power meter measures the power from each individual leg to calculate
your total power output.
INSTALLATION
Install your crankset with 4iiii power meters and following the crankset
manufacturer’s instructions.
The steps to install the crankset vary between models. Follow the
manufacturer’s instructions, or consult your local bike mechanic for
assistance. Installation instructions for your new Shimano crankset are
included with the Ride Ready option.
IMPORTANT / BEFORE RIDING: After installing the crankset, please spin it
by hand and ensure clearance between your frame and the power meter pods, on
the drive and non-drive side. If there is contact between either power meter
and your frame, please contact us at
[email protected] and do not ride your bike,
at the risk of damaging your power meter or frame.
4iiii APP
Wake up PRECISION 3+ PRO by rotating the crank 3-4 times.
Pair with the 4iiii app and link your
power meters as a dual.
-
Select ‘add device’
-
Select both your power meter pods at the same time and press pair.
Selecting both before pressing connect will automatically link them together as a dual. -
Perform any updates.
DISPLAY UNIT
Pair your power meter with a compatible display unit using ANT+ or Bluetooth.
- Turn on your display unit.
- Spin the crank 3-4 times to wake up your power meter.
- Navigate to the “sensors” menu on your display unit.
- Add your power meter
ZERO OFFSET
Perform a zero offset, sometimes referred to as a calibration.
- Unclip and dismount. Hold the bike upright and stationary, and position the crank arms at 12 and 6 o’clock, with the non-drive side crank arm down.
- Select “Zero” or “Calibrate” on your display unit.
APPLE FIND MY
Connect to the Apple Find My app (For iOS users)
- Remove and reinstall the battery on your Non-Drive Side PRECISION 3+ PRO Powermeter three times (x3) to trigger Apple Find My pairing mode.
- From the Apple Find My app, add your PRECISION 3+ PRO Powermeter.
TIPS
-
DO NOT expose your power meters to degreasers, or abrasive or corrosive cleaning agents.
Don’t pressure wash your power meters. -
Battery levels can be checked using the 4iiii App.
-
For best results, perform a zero offset before each ride.
-
To remove the drive-side battery cap a Phillips #1 screwdriver is required. The non-drive-side cap twists off without any tools.
-
The PRECISION 3 + PRO comes with both batteries pre-installed. When needed, replace them with any CR2032 battery.
-
Store your power meters in temperatures no colder than -40°C (-40° F) and no warmer than 60°C (140° F)
THANK YOU FOR PURCHASING
PRECISION 3+ PRO POWERMETER
For the complete user manual go to
4iiii.com/support
Need additional support? E-mail
[email protected]
Documents / Resources
|
4iiii Innovations 3 Plus Pro Precision Power
Meter
[pdf] Installation Guide
3 Plus Pro Precision Power Meter, 3 Plus Pro, Precision Power Meter, Power
Meter, Meter
---|---