CHAMPION CHSD410 Skaftdammsugare Solid 2-in-1 User Manual

: June 6, 2024
: Champion

Table of Contents

Safety Precautions
Structure Diagram
Assembly
Use
Cleaning and Maintenance
Warranty
Technical Specification
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CHAMPION CHSD410 Skaftdammsugare Solid 2-in-1 User Manual

Read this Manual carefully before use

Safety Precautions

Please make sure to read this Operation instruction, to ensure a safe and correct usage. Keep this Operation Instruction for future reference. The product is intended for household use only.

Do not place the product near to flammables (such as gasoline or natural gas) as it can lead to malfunction or fire.
All packaging materials should not be accessible to children to avoid suffocation.
Do not block on the suction inlet or the air outlet for long time during the operation of the product.
Unplug the attached power supply adaptor together with the power supply plug. Otherwise, it may lead to electric shock or malfunction.
Make sure to use the filter in the dust cup during application. Otherwise, it may lead to fault.

Safety Warnings

Do not disassemble, repair or remodel the product by yourself, as it may lead to electric shock or fire. Contact with an authorized service center or place if purchase.
The battery should never be dismantled, short circuited or placed against a metal surface.
Make sure the product does not absorb gasoline, kerosene or cigarette end with spark, and do not absorb water or flammable powder; otherwise, it may lead to malfunction or fire disaster.
Do not damage the charging wire, including bending, stretching, twisting, bundling, pressing or squeezing by violence. Damage on the charging wire may lead to fire disaster or electric shock.
Never use the product if it has obvious damages, contact with an authorized service center or place if purchase.
Please do not use the product in conditions that the charging wire or the plug is damaged. Otherwise, it may lead to electric shock, short circuit or fire disaster.
Children under 8 years old must be supervised by an adult when using the product. Do not place the product in positions accessible to infants. Otherwise, it may lead to electric shock, burs or injuries.
Make sure to remove the plug from the socket when not in use, except for charging.
Make sure that the plug is inserted into the socket in a correct way. In condition that the plug is attached with dust, please clean it with dry cloth. Otherwise, it may lead to circuit short cut.
Do not connect the charging adapter of this product with other products. Otherwise, it may lead to fire disaster, electric shock or fault.
Do not soak the product into water or any other liquid. Otherwise, it may lead to electric shoc
Never vacuum sharp objects or liquids.
Do not place vacuum cleaner close to a heat source, such as radiator, stove etc.
Do not touch on the involving brush during operation as it can cause personal injury.
Do not insert or unplug the plug with wet hands. Otherwise, it may lead to electric shock.
To protect the motor, battery and electronics the product should not be stored or operated in an ambient temperature below 5 °C or exceeding 35 °C. If the product is stored in a temperature below 5 °C or exceeding 35°C, let the product cool down or warm up and dry for a few hours before usage.

Structure Diagram

Switch
Handle
Lock catch button
Motor
LED lamp

Handheld unit

Handheld unit

Dust container
Switch
Charging lamp
Handle
Air outlet
Switch of Dust container
Suction inlet

Charging dock

Charging port 1

Floorbrush (bottom)

Rolling wheel
Revolving brush

Bottom part of Charging Set

Upper part of Charging Set

Dusting brush

**Flat noze brush

**

**Charger

**

Assembly

Charging Socket

Assemble the upper part and the bottom part of the charging socket together. Insert the power supply port of the adapter into the power supply hole on the bottom plate and place the wire along the groove.

Handle and Hand-held Unit

Installation of handheld unit:
Place the front end of the dust cup into the base groove firstly, and then push the hand-held vacuum cleaner into the base, until a sound of ”click”, and the product is installed in a correct way.
Handle

Assembly of handle:
Loosen the screw of the outer side of the base firstly, and insert the handle into the base, and tighten the screw back with tools. (As shown in Step 1, 2 and 3).

Preparation for Charging

Insert the charging port of the vacuum cleaner into the socket of the charging base.
Insert the power supply plug of the adapter into the socket.
The charging begins when the power supply indicator light of the vacuum cleaner turns to red.
The charging will be ended automatically about 5 hours later, the power supply light turns off.

Tips:

The charging will end automatically after approx. 5 hours.
It is normal for slight heating of the product and the adapter during the charging process.
If the vacuum cleaner stops operation suddenly and the green light is off, it indicates that it is needed to charge for the product.
The battery is in dormant state if the product has not been used for a long time, and it is normal for the capacity to be lower than that of the normal value. 3-5 times of normal charging and discharging circulations will activate the battery, to recover to normal capacity.

Use

If cleaning with the hand-held part only, control with the switch on the hand-held part.
The indicator light will be in constant on in green when the vacuum cleaner is in operation.
In power off state, switch the switch for once to put in on LOW Power, and for twice to put it to HIGH Power, and for one more time to achieve Power OFF.

Electric floor brush: The floor brush is equipped with LED lamp on the head and suitable for all kinds of floors, carpets etc.

Flat suction nozzle: Place the flat suction nozzle into the front end of the dust cup of the hand-held part. Suitable to clean areas such as corners of wall, between stairs steps, gaps etc.

Dusting brush: Place the dusting brush nozzle into the front end of the dust cup of the hand-held part, to clean the dust on surfaces such as fabrics on sofa, curtains etc.

Emptying the dust container

Press the button down to take out the dust container.
Take out the filter.
Empty the rubbish from the dust container.
Take out the filter element from the filter screen.
Clean the rubbish in the filter element and the filter screen by carefully by knocking it.
Assemble back according to the disassembly procedures. A ”click” sound after pressing ensures a proper installation for the places between the dust container and the hand-held unit.

Note: It is required to use both filter screen and the filter, otherwise it may lead to malfunction of the vacuum cleaner.

When finished cleaning

Place the vacuum cleaner back to the charging base.

The accessories of the suction nozzle mouth can be placed on the back side of the charging base for storage.

Cleaning and Maintenance

Revolving Brush

Open the lock with tool, for example a coin, and disassemble the cover plate. (1)
Take off one end of the revolving brush from the driving belt. (2)
Take off the whole revolving brush from the direction of the suction nozzle. (3)
Clean off the hair/dust of the long strip entanglements on the revolving brush with scissor. (4)
If necessary, flush the revolving brush with water, and place it back into the floor brush after drying.
Remove the rubbish accumulated on the suction nozzle or the surface.
Ensure that the driving belt has been assembled correctly with the motor and the brush. The brush will not revolve if the belt is placed in incorrect position.

Dust Container

Remove the rubbish/dust attached with a dry cloth. Wash with water if necessary.

Filter

Clean the rubbish/dust in the filter element and the filter screen by carefully knocking it.
Clean in water with a small amount of neutral detergent.
Wash it with a soft brush and flush the inside of the filter under tap to remove the pollutants.
Install it back after sufficient drying. If not dry, it may cause blocking.

Note: Make sure that the filter is completely dry. Otherwise, it may lead to absorption degradation or fault. If the filter is blocked and the dust/rubbish cannot be removed – replace it with a new one.

Warranty

Champion Nordic guarantees that this product is free from manufacturing defects in terms of materials and workmanship during a period of 2 years in Sweden, Norway, Denmark and Finland. This warranty period begins on the day the product is purchased or delivered. Champion Nordic has no obligation to repair or replace products that are not accompanied by a valid proof of purchase. This warranty applies only to products purchased and used for home use and does not cover damage resulting from abuse, failure to comply with the instructions from Champion Nordic, cases in which the product has been modified or subjected to unauthorized repair, improper packaging on the part of the owner, normal wear and tear, or improper handling on the part of a transport company.

Correct Disposal of this product

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

Technical Specification

Item: CHSD410
Battery: Lithium battery 18.5V 2200mAh
Operation: 25 min – HIGH, 40 min – LOW
Power: 100W
Notice: ≤72
Air flow: 0.6m³/min
Max. Vacuum: >5Kpa
Dust capacity: 0,5L
Rated Voltage: 100V-240V DC
Rated Frequency: 50 ~ 60Hz
Net. weight: 2,2KG
Gross weight: 4,4KG