Schumacher SL1467 Portable Power Generator Owner’s Manual

: June 6, 2024
: Schumacher

Table of Contents

Schumacher SL1467 Portable Power Generator Owner’s Manual
1. IMPORTANT SAFETY INSTRUCTIONS
2. PERSONAL SAFETY PRECAUTIONS
3. ASSEMBLY INSTRUCTIONS
4. FEATURES
5. LCD SCREEN
6. OPERATING INSTRUCTIONS
7. MAINTENANCE AND CARE
8. WARNINGS
9. TROUBLESHOOTING
10. SPECIFICATIONS
11. REPLACEMENT PARTS
12. BEFORE RETURNING FOR REPAIRS
13. LIMITED WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Schumacher SL1467 Portable Power Generator Owner’s Manual

Schumacher SL1467 Portable Power Generator

MODEL: SL1467

PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE. This manual will explain how to use the unit safely and effectively. Please read and follow these instructions and precautions carefully.

1. IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions.
This product is not intended for use by children.
If someone else uses the unit, ensure they are well informed on how to use it safely, and have read and understood the operating instructions.
Do not use near flammable fumes or gases, such as in the bilge of a gasoline-powered boat or near propane tanks.
Do not use in an enclosure containing automotive-type lead-acid batteries.
Do not expose the unit to temperatures over 104 °F (40 °C).
Do not operate the unit with damaged cord or plug – replace the cord or plug immediately.
Do not recharge the unit with a damaged extension cord.
Do not operate the unit if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified service person.
Do not disassemble the unit. If repair is required, contact Customer Service for assistance.
To reduce risk of electric shock, unplug the unit from the outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
The unit gets uncomfortably warm during use and must have proper ventilation. Ensure at least 3 in. (7.5 cm) air space is maintained on all sides of the unit.
Do not set the unit on flammable materials, such as carpeting, upholstery, paper, cardboard, etc. During operation, keep unit away from materials that can be affected by high
temperatures, such as blankets, pillows and sleeping bags.

2. PERSONAL SAFETY PRECAUTIONS

WARNING! Restrictions on Use.

This unit may not be used with life support devices or systems. Failure of this device can reasonably be expected to cause failure of that life support device or system, or to affect the safety or effectiveness of that device or system.
When working on electrical equipment, always ensure someone is nearby to aid you in case of an emergency.

3. ASSEMBLY INSTRUCTIONS

Remove all cord wraps and uncoil the cables prior to using the unit.

4. FEATURES

FIG 1 FEATURES

Handle
AC charger input socket
LED Light
Light button
2.4A USB ports (3)
3A USB port
USB output button
12V DC output ports (2)
12V DC cigarette outlet output port
DC output button
110V AC power outlets (2)
AC output button
Main Power button
LCD display

5. LCD SCREEN

FIG 2 LCD SCREEN

6. OPERATING INSTRUCTIONS

IMPORTANT! Charge immediately after purchase and when battery level is below 40%, to keep the internal battery fully charged and prolong battery life.

POWERING ON
Press the ON/OFF power switch. The unit will initialize, and all icons on the LCD screen will activate. If normal function is detected, the screen will return to its normal display.

CHECKING THE LEVEL OF THE INTERNAL BATTERY
The Battery Capacity Indicator on the LCD display will show the battery’s charge level in 20-percent increments. For best performance, the battery capacity should be 20% or greater.

CHARGING THE INTERNAL BATTERY
NOTE: Do not use the unit while charging its internal battery.

AC adaptor

If the AC Output LED is lit, press the AC button to turn off before charging.
Connect the provided AC charger to the AC input socket on the front of the unit. Plug the charger’s power cord directly into a live grounded 120V outlet. Charging will start automatically, and the Charging and the Battery Capacity indicators will flash.
When the internal battery is fully charged, all five bars of the Battery Capacity indicator on the display will show. After 10 seconds, the display will turn off. Complete charging will take approximately 10.5 hours.
When the unit is fully charged, unplug the charger from the 120V outlet and then from the unit.

Solar Charging (120W panel not included)

If the 12V DC Output LED is lit, press the DC power button to turn off before charging.
Place the solar panel (not included) in direct sunlight. Do not expose the power station to direct sunlight or wet conditions.
Connect your 3.5mm solar panel output cable to the DC input port of the unit. Charging will start automatically, and the Charging and the Battery Capacity indicators will flash.
When the internal battery is fully charged, all five bars of the Battery Capacity indicator on the display will show. After 10 seconds, the display will turn off. Complete charging will take approximately 10.5 hours.
When the unit is fully charged, unplug the solar panel from the unit.

POWERING A 12V DC DEVICE
NOTE: Do not power a 12V device while charging the internal battery.

FIG 3 POWERING A 12V DC DEVICE

FIG 4 USING THE LED LIGHT

USING THE AC POWER OUTLETS
The SL1467 is equipped with a 1000W pure sine wave inverter, which produces power for all electronic devices and appliances. It is important to know the continuous wattage of the device you plan to use with the AC outlets. The unit must be used with devices drawing 1000 watts or less. Devices such as fans or electric motors require additional power to start (commonly known as the “starting” or “peak” power). The generator can supply a momentary surge in wattage of as high as 2000W for less than 1/10 of a second; however even devices rated less than the maximum 1000 watts can exceed the inverter’s surge capability and cause an automatic overload shutdown. Do not use the inverter with a product that draws a higher wattage than the inverter can provide, as this may cause erratic operation.

CAUTION: Always run a test to establish whether the inverter will operate a particular piece of equipment or device. In the event of a power overload (noted with a flashing Warning icon), the inverter is designed to automatically shut down. This safety feature prevents damaging the
inverter while testing devices and equipment within the 1000-watt range. If powering more than one device, start one device at a time to avoid a power surge and/or inverter overload. The surge load of each device should not exceed the inverter’s Continuous Operation wattage rate.

You can use an extension cord from the inverter to the device without significantly decreasing the power being generated by the inverter. For best operating results, the extension cord should be 16 AWG (1.31 mm2) or larger and no longer than 50 feet.

WARNING! RISK OF ELECTRIC SHOCK.
Incorrect operation of your inverter may result in damage and personal injury. The inverter output is 110V AC and can shock or electrocute the same as any ordinary household AC wall outlet.

NOTE: The maximum continuous load is 1000 watts. Do not use the AC outlets with a product that draws more than 1000 watts, as this may cause erratic operation.

CAUTION:

Do not connect an AC power source to the 110V AC outlets.
Do not connect the unit’s AC power cord to its 110V AC outlets.

NOTE: Do not power an AC device while charging the internal battery.

Connect your AC-powered devices or small household appliances to one or more of the unit’s two AC outlets.
NOTE: Make sure the device to be powered is OFF before inserting the plug into the AC power outlet.
Press the AC Power button. The AC Output icon will show on the display, to confirm that the unit is on and ready to provide AC power. The Power Output indicator will also show on the display.
NOTE: Extended operation of an AC device may result in excessive battery drain.
Recharge the unit when the battery level is below 40%.

ESTIMATED RUN-TIMES

FIG 5 ESTIMATED RUN-TIMES