pdp gaming 500-188 Joy-Con Charging Shuttle User Guide
- June 6, 2024
- pdp gaming
Table of Contents
pdp gaming 500-188 Joy-Con Charging Shuttle User Guide
QUICK START GUIDE
ITEMS INCLUDED
A: Charging Shuttle
B: Quick Start Guide
LED CHARGING INDICATORS
LED CHARGING INDICATOR: Once you connect the Joy-Con Charging Shuttle to a power source, the LED indicators on the top of the charging shuttle will turn on and begin flashing. The individual charging indicators let you know the charge status of each Joy-Con controller. Once fully charged, the lights will remain solid.
INSTALLING & CHARGING THE JOY-CON CONTROLLERS
- To set up your Joy-Con Charging Shuttle, connect the USB cable to the Nintendo Switch Dock, or any other USB port.
- Once connected, the LED charging indicators on top of the charging shuttle will flash 3 times, indicating “ready” status.
- Line up the Joy-Con controllers with the rails on the charging shuttle and carefully slide them down until they can’t go any further.
- The LED charging indicators will light up and begin breathing to indicate the Joy-Con controllers are properly installed.
- When charging, the LED indicators will show the charge status of each respective Joy-Con controller.
- The LED charging indicators will remain solid when fully charged.
REMOVING THE JOY-CON CONTROLLERS
To remove a Joy-Con controller from the Joy-Con Charging Shuttle, simply pull the controller up and out.
Class B Equipment
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is Connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
2-YEAR LIMITED MANUFACTURER’S WARRANTY
Coverage and Terms
PDP warrants that this product will be free from manufacturing defects for two
years from the original date of purchase. Manufacturing defects are those
defects in materials and/or workmanship, subject to final determination by
PDP’s customer service department. This warranty applies only to original
purchasers with a valid proof of purchase from an authorized PDP retailer that
clearly shows the date of purchase.
Exclusive Remedy and Exclusions
The exclusive remedy for valid claims will be the repair, replacement, or
refund of the product. This warranty does not cover defects caused by
accidents, improper or abusive use of the product, unauthorized or improper
modifications, repairs, or handling.
How to Get Service
Purchasers with product issues should not return the product to the store, but
instead contact PDP’s customer service department first. You can contact PDP
customer service by phone at
1.800-331-3844 (US and Canada only),
Monday to Friday from 8 AM to 6 PM PST. International customers can contact us
by phone at +442036957905. You can always reach us, 24/7, by visiting
support.pdp.com and clicking the “Submit a Request” button top right of the
page to open a support ticket. Inquiries are typically answered within 24
business hours.
Your Rights Under Applicable Law
This warranty does not affect the legal rights of customers under applicable
state, provincial, or national laws governing the sale of consumer goods.
Additional Information for Australian Consumers
PDP products come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure. The benefits given to you under our express warranty are in
addition to other rights and remedies you have under the Australian Consumer
Law and other laws.
© 2020 Performance Designed Products LLC. PDP, PDP Gaming, Level Up Your Game, and their respective logos are trademarks and/or registered trademarks of Performance Designed Products LLC. All rights reserved. © 2020 Nintendo. Nintendo Switch is a trademark of Nintendo. Licensed by Nintendo. All rights reserved. All other logos and trademarks are the property of their respective owners.
Please keep this information for future reference.
This product is manufactured and imported by Performance Designed Products
Ltd.
Performance Designed Products LLC. 4225 W Buckeye Rd #2 Phoenix, AZ 85009, USA
Performance Designed Products Ltd. 104 Bld Sebastopol 75003, Paris, France
Performance Designed Products Australia Pty Ltd. GPO Box 457 Brisbane, QLD
4001, Australia
support.pdp.com
Need Help?
Visit support.pdp.com or talk to us at
800-331-3844
( USA and Canada only) or +442036957905 (UK only).