KOAMTAC KBLED41 USB BLE Dongle User Guide
- June 6, 2024
- KOAMTAC
Table of Contents
KBLED41
USB BLE Dongle
KBLED41 USB BLE Dongle 181030
– Quick guide
– Part No: 829530
Quick Guide
-
Insert KBLED41 USB BLE Dongle into your computer.
-
Windows will automatically install “HID Keyboard device” in the Device Manager of Control Panel as pictured below. (Default interface is USB HID)
-
Scan Connect Barcode included in this package to connect KDC to KBLED41 USB BLE Dongle.
-
KBLED41 USB BLE Dongle will automatically connect to KDC.
-
KBLED41 USB BLE Dongle can be changed to USB Serial mode by scanning the below barcode.
-
KBLED41 USB BLE Dongle is configured as a COM port once it has been changed to USB Serial mode as pictured below.
-
KBLED41 USB BLE Dongle is changed back to USB HID mode by scanning the below barcode.
-
Please attach one of the ‘included Connect Barcodes to your Windows PC close to KBLED41 USB BLE Dongle.
KOAMTAC, Inc.
116 Village Blvd, Suite 305
Princeton, NJ 08540, USA
Phone: +1.609.256.4700
FAX: +1.609.228.4373
email: [email protected]
www.koamtac.com
Package Contents
KBLED41 USB BLE Dongle Quick guide Connect Barcode
System Requirements
OS: Windows 7/8/10
Specifications
Bluetooth Standards: Bluetooth Low Energy 4.1
Radio Frequency: 2.4 GHz – 2.4835 GHz
Physical Dimensions: 0.87″ x 0.59″ x 0.21″ (22 mm x 15 mm x 5.35 mm)
Weight: 0.07 oz (2.0 g)
Antenna: Internal Chip Antenna
Input Power: 5V (USB bus-powered)
Power Consumption: 5V, 30mA max
Interface: USB 2.0 (HID/Serial)
Transfer Rate: Up to 1.0Mbps
Range: 98 feet (30 meters)
OS support: Windows 7/8/10