boAt Rockerz Trinity Wireless Neckband Earphones User Manual
- June 9, 2024
- Boat
Table of Contents
boAt Rockerz Trinity Wireless Neckband Earphones
BOAT ROCKERZ TRINITY
Thank you for choosing boAt Rockerz Trinity This manual is meant to guide you through to the shores of audio bliss without difficulty. Please think of this manual as your map Knowledge of Bluetooth and device connection is essential for steering this boAt. Therefore, we strongly advise that this manual is thoroughly read before use, and referred to in times of difficulty
PACKAGE CONTENTS
- 1 )( Rocl<e,z Trinity
- 1 x use Type C charging c,-ble
- 2 x Pairs of additional earmuffs (Small & Large)
- 1 x Menu.al
- 1 x Cotalogue
- 1 x Warranty Card
PRODUCT OVERVIEW
POWER ON:
When switched off, long press the MFB (Multifunction Button) for 3 seconds.
The blue and red LEDs start flashing alternatively after the lnltlol blue LED
flash for a second.
POWER OFF;
Long press the MFB for 5-seconds. Red LED blinks once to indicate the device
getting switched off.
TO PAIR WITH BLUETOOTH
- Turn on the Bluetooth functionality on your phone and switch on Rocker: Trinity
- . The neckband’.s indicator starts blinking in blue & red alternatively to indicate that the earphones have gone into pairing mode
- Then, select Rockerz Trinity’ from the list of available devices after search
- If asked for a passkey, confirm the passkey ‘0000’ on phone
- Once confirmed, the neckband and phone get connected via Bluetooth indicated by a voice prompt
Note
IF there’s a connection history between the phone and the neckband then they automaticaly get reconnected in a working range whenever the neckband gets switched on while the phone’s Bluetooth mode is turned on.
If there’s no pairing established in 5 mins then the neckband gets automatically switched off
SPECIFICATIONS
Note: If the voice assis tant doesn’t get triggered, then the functionality has to be first enabled via your media device settings.
CRYSTAL BIONIC SoUND POWERED BY HIFI DSP
Rockerz Trinity offers Crystal Bionic Sound powered by HiFi DSP for a crystal-
clear sound quality and device independent built-in HD audio. Double press the
Muitifunction button to switch to Crystal Bionic Sound powered by HIFI DSP.
Once switched, it is notified via a sound prompt Balanced Mode’. Double press
the Multifunction button again to switch back to boAt Signature Sound. Enjoy
the Music, as you like, just as you deserve.
BEAST MODE
Triple press the Multifunction button to switch to Low Latency mode, also
known as the BEAST” Mode. Once switched on, it gets notified via a sound
prompt. Triple press the Multifunction button again to turn it off and return
to Music Mode. Made for the Gamers By Gamers, BEAST” Mode reduces the latency
significantly and improves the overall gaming experience.
ENx TECH
Our ENxT tech algorithm cancels out the background noise so that you can be
heard crystal clear via voice calls. One need not activate ENX as the mic is
equipped with the same and activated by default. Deliver your voice without
interruptions anywhere traffic, railway stations, airports, work space;
literally anywhere!
DUAL PAIRING
To connect your audio headset to two devices simultaneously firstly connect
the earphone to one of the devices. Then, switch off both: the earphone and
the device’s Bluetooth. Thereafter, connect the earphone to the second device,
and again switch on the first device’s Bluetooth. The earphone gets connected
to both devices. If not, connect the first device manually once again to
activate dual pairing.
OTHER FUNCTIONS
If you receive an incoming call during playing music, the music automatically
disconnects. When the call is done & disconnected, the music starts to play
automatically from where it left
TO CHARGE
-
Connect one end of the provided cable to the USB Type C port on the headset and the other end to a wall adapter or laptop
-
While charging, the indicator LED turns into steady red
-
Once the headphone gets fully charged, the indicator turns off
Note: Use only authorized/company chargers for the headset, as unauthonized ones may damage the same & invalidate the warranty on the headset as wel -
The earphones cannot be utilized for the purpose of listening while it is in charging mode
SPECIFICATIONS
CHARGING NORMS & PRECAUTIONARY GUIDELINES
- Charger/Brick/Adapter: 5/2A 2)
- Cable/Wire: Standard Cable (35 strands @O.10mm diameter/ strand)
Any other accessory can be paired up with the product as long as the specifications ara as per above norms
ANOMALIES & SOLUTIONS
- A. Mobile can’t search the headset Check if the Bluetooth headset is powered on or off (When powered on, the LEDS blink with red and blue colours alternatively) If it is powered on and the device still can’t connect, then please reboot the headset device and the phone
- B. After connecting the headset with the phone, disconnection or noise occurs This may be due to the low power of the headset. Please charge the Bluetooth headset There might be obstruction between the headset and the phone or the distance between them exceeds the maximum range for signal reception
- C. If the Voice Assistant support doesn’t respond If the voice assistant doesn’t get triggered, then the functionality has to be first enabled via your media device’s settings
SAFETY CAUTIONS
- This is not a toy. The children are advised to use this under adult supervision.
- Avoid exposing the device to extremely hot or cold temperatures.
- Avoid using the neckband for Ilistening to full volumes in order to protect from hearing damage
- Please do not use the device under thunderstorms.
- Don’t dismantle the product in any way.
- Please don’t clean the product using oily volatile liquid.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>