Olympus LI-10B Stylus 410 Digital User Guide
- June 16, 2024
- Olympus
Table of Contents
- Olympus LI-10B Stylus 410 Digital User Guide
- 1. UNPACKING THE BOX CONTENTS
- 2. PREPARING THE CAMERA FOR USE
- 3. TURNING ON THE CAMERA
- 4. TAKING PICTURES
- indicator in the monitor or the orange lamp next to the viewfinder lights.
- 5. VIEWING AND ERASING PICTURES
- 6. CONNECTING THE CAMERA TO A COMPUTER
- 7. INSTALLING THE CAMERA SOFTWARE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Olympus LI-10B Stylus 410 Digital User Guide
OLYMPUS AMERICA INC.
Two Corporate Center Drive, Melville,
NY 11747-3157, U.S.A.
http://www.olympusamerica.com/support
Olympus Europa GmbH
Wendenstrasse 14-18,
20097 Hamburg, Germany
http://www.olympus-europa.com/
START HERE
It is strongly recommended that you follow these step-by-step numbered
instructions to set up and quickly begin using your new Digital camera.
For more detailed instructions on advanced features, please refer to the printed Basic Manual included in your package, or the Reference Manual on the CD-ROM.
1. UNPACKING THE BOX CONTENTS
Gather your Digital Camera and the parts as shown in the illustration. You’ll need these to complete the steps for the camera set-up procedures that follow.
The following items are also included in the Digital Camera package: Basic Manual, A/V cable, RM-2 remote control, warranty card, registration card (not provided in some areas).
2. PREPARING THE CAMERA FOR USE
Before you begin using your Olympus Digital Camera…
3. TURNING ON THE CAMERA
All you need to do is slide the lens barrier open or close to turn the camera ON or OFF.
4. TAKING PICTURES
There are two ways to compose your subject: using the monitor or with the viewfinder. Depending upon the shooting situation, there may be advantages to each method. Please refer to the printed Basic Manual for more information.
a. Taking a Picture with the Monitor
• Open the lens barrier fully.
• Frame your subject using the monitor.
Icons representing camera settings appear on the monitor, telling you
important information such as the
Flash and record modes, battery life, and the number of frames remaining.
• Press the shutter button halfway. The green lamp will light steadily when
the focus and exposure are set.
• Press the shutter button completely to take the picture. A short beep
confirms your picture has been taken.
b. Taking a Picture with the Viewfinder
• Open the lens barrier fully.
• Frame your subjects using the AF target mark in the viewfinder.
• Press the shutter button halfway.
The Digital Camera confirms the focus and exposure are properly set when the green lamp in the viewfinder lights steadily.
• Press the shutter button completely to take the picture.
A short beep confirms your picture has been taken.
c. Zooming
This Digital Camera features a zoom lens, allowing you to get closer to
action, or capture wide-angle shots and get everything into the picture.
• Push the zoom button W to zoom out and get everything into the picture.
• Push the zoom button T to choose telephoto shooting and get closer to the
action.
d. Flash Modes
This Digital Camera features multiple flash modes.
Please note that not all flash modes are available depending on the shooting
mode selected.
With the shutter button depressed halfway, the flash is ready to fire when the
indicator in the monitor or the orange lamp next to the viewfinder lights.
When the orange lamp is blinking, the flash is charging.
e. Number of Storable Pictures
Your Digital Camera can handle xD-Picture Cards from 16 MB to 512 MB. The
number of storable pictures depends on the image quality selected. The default
quality mode is HQ mode. This mode allows you to capture high quality images
with medium file sizes. The HQ mode is suitable for most shooting situations.
See the Camera Reference Manual on the CD-ROM for complete descriptions of
each recording mode and the storable frame capacity for the various resolution
modes and xD-Picture Card capacities.
TIP:
To find out how many frames you have left, turn on the monitor and look for the number in the lower right corner. Remember, you can always delete unwanted pictures to make room for more. (See Step 5.)
5. VIEWING AND ERASING PICTURES
With a Digital Camera, you can easily view the photos you want—and delete the ones you don’t.
6. CONNECTING THE CAMERA TO A COMPUTER
TIP: Olympus recommends using the optional AC adapter to ensure a consistent power supply when downloading images.
Make sure that the camera is turned off before connecting it to your computer.
Windows 98 users must install the “USB Driver for Windows 98” software before
connecting the Digital camera to the computer.
Refer to the Software Installation Guide for complete information.
7. INSTALLING THE CAMERA SOFTWARE
You’ve now mastered the basic functionality of your new Olympus Digital Camera! You are now ready to begin exploring the possibilities that digital photography brings to your computer. Activities such as photo editing, printing, and much more are only steps away!
About the Olympus CAMEDIA Master CD-ROM
Your Olympus Digital Camera comes bundled with a suite of software and
documentation.
The CD includes:
• CAMEDIA Master: To download pictures from the camera, view, organize,
retouch and print your digital photos and movies.
• USB Driver for Windows 98: This utility must be installed to allow the
camera to communicate with your computer if it uses the Microsoft Windows 98
operating system.
• Olympus Digital Camera Reference Manual: A complete reference guide in
digital form, saved on the CD in PDF format.
You are now ready to install the computer software.
• Open the CAMEDIA Master CD-ROM package and locate the Software Installation
Guide in the language you wish to use.
• Continue to follow the step-by-step instructions for installing the
software, and enjoy your new digital photo processing capabilities!
Additional Camera Features
This Digital Camera offers a host of advanced features to expand your
creativity. Here’s just a small sampling.
See the Basic Manual for details on these capabilities, and more!
- 10 Scene Program Shooting Modes: By using the virtual dial, you can easily select the camera settings that most closely match your shooting situation.
- Sequential Shooting: Take a rapid succession of still pictures.
- Still Picture Editing: Edit still pictures and store them as new pictures.
- Macro Mode: For close-ups as tight as 0.7 ft. (0.2m), select Macro Mode.
- Movie Recording: Yes, this Digital Camera records movies with sound!
- Two-in-one Pictures: Combine two separate images taken in succession and store them as a single picture.
- Close-up Playback: Enlarge the pictures in the monitor to check details of the selected image.
- Index Display: View several thumbnail pictures on the monitor at once.
- Protecting Pictures: Prevents you from accidentally erasing photos.
- Video Playback: View your pictures and movies on a television monitor.
- Panorama Shooting: Connect overlapping images into a single picture using the panorama mode and Olympus Camedia Master software.
- Direct Printing: Connect directly to your PictBridge-compatible printer with the USB cable to print your favorite images easily.
TIP:
Remember to complete and return your Registration Card (not provided in some areas), and keep all camera documentation handy.
Technical Support (USA)
1-888-553-4448 (Toll-free)
8:00 AM – 10:00 PM ET
Monday – Friday
European Technical Customer Support
00800-67 10 83 00 (Toll-free)
+ 49 180 5 – 67 10 83 or +49 40 – 237 73 899
(Charged)
9:00 AM – 6:00 PM MET
Monday – Friday
© 2004 OLYMPUS CORPORATION
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>