XPOWER FD-630D Drum Fan Owner’s Manual

June 6, 2024
XPOWER

XPOWER FD-630D Drum Fan Owner’s Manual

XPOWER FD-630D Drum Fan

Model: FD-630D (115V 60HZ)

Read and save these instructions before use

www.xpower.com | 1-(855)-855-8868 | info@xpower.com

Safety Instructions

WARNING : READ AND SAVE THIS INSTRUCTIONS BEFORE USING THIS PRODUCT.

The user of electrical products may create hazards that include, but are not limited to injury, fire, electrical shock. Failure to follow these instructions may damage and/or impair its operation and void the warranty.

  • Before operating, remove all packaging material and check for any damage that may have occurred during shipping or any missing items.
  •  Check household power supply to ensure it matches the appliance’s specification.
  • DO NOT operate any fan with a damaged cord or plug. Discard fan or return it to an authorized service facility for examination and/or repair.
  • Use only on GFCI protected receptacles. Please contact a qualified electrician for verification and / or installation of a GFCI receptacle if necessary.
  • DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar coverings. DO NOT route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
  • Suitable for use with solid state speed control.
  • DO NOT touch this appliance or the plug with wet hands or while standing in water.
  • DO NOT operate the appliance in any pooled water.
  • DO NOT use the product in areas where gasoline, paint or other flammable goods and objects are used or stored.
  • DO NOT insert or allow objects to enter any ventilation or exhaust opening as this may damage the appliance and void the warranty.
  • DO NOT cover the air inlet or outlet on the appliance.
  • DO NOT direct the air flow at human faces or bodies.
  • DO NOT allow children to play around or with this appliance.
  • AUTOMATICALLY OPERATED DEVICE – To reduce the risk of injury, disconnect from power supply before servicing.
  • Remove the power cord from the electrical receptacle by grasping and pulling on the power cord plug-end only, DO NOT pull the cord directly.
  • DO NOT attempt to repair or adjust any electrical or mechanical functions of this appliance, as this may cause danger and void the warranty.
  • If the appliance is damaged or it malfunctions, DO NOT continue to use it. Unplug the product from the electrical outlet. Refer to troubleshooting guide or contact XPOWER.
  • Store in a dry area, away from exposure to sunlight, extreme temperature and humidity, or other extreme environments, when not in use.
  • An electronic instruction manual can be obtained through manufacture’s website www.Xpower.com.

Items included

FIG 1 Items included

Parts Description

FIG 2 Parts Description

FIG 3 Parts Description

Drum Fan Introduction

FIG 4 Drum Fan Introduction

  • XPOWER Drum Fans are designed to create a cool zone for both indoor and outdoor with its huge amount of “natural feeling” airflow and efficient powerful brushless DC motor.
  • It’s perfect for indoor and outdoor activities and events where efficient ventilation, cooling or even stage effects of wind are needed.
  • The brushless DC motor technology allows efficient airflow output with less energy than conventional motors as well as a wide range airflow adjustment from 10 to 9500 CFM.

Operation guide

Switch plate

FIG 5 Switch plate

Power Control

  • Switch to “OFF” position to disconnect the drum fan from the power. Switch to “ON” position to connect the drum fan from the power.

Speed Control

  • Turn to “OFF” position to switch the drum fan OFF. Turn clock-wisely to any position between “MIN” and “MAX” to switch the drum fan ON.
  • You can adjust to any desired speed variably.

IMPORTANT

  • When finished, turn the speed control to “OFF” position to switch the drum fan OFF first, and then turn off the power control.

Adjust operating position

FIG 6 Adjust operating position

  • The position of the drum fan is held by the rack handles on the rack.
  • To adjust the operating position, turn anti-clock-wisely to loosen the rack handle and then use the handle to rotate the drum fan and adjust to desired position.
  • Turn clock-wisely to fasten the rack handle and hold the position of the drum fan. Make sure it’s tight enough when the fan is working.

Transportation

FIG 7 Transportation

Lift with Handles

  • Lift the drum fan with the two handles on the top.
  • Be aware of the weight of the machine.

FIG 8 Transportation

User Maintenance Instructions

Frequent maintenance is recommended on this appliance. Failure to follow the maintenance instructions may cause failure of the appliance and void the warranty.

  • When not in use, unplug and store the appliance in a dry and cool indoor place. Make sure it’s out of reach of children.
  • Before performing any maintenance or cleaning, always disconnect the air mover from its power source.
  • Use a damp cloth to wipe the surface of the housing. Do not clean the unit with water directly.
  • Check if the grille covers are clean. Remove dirt or any other objects that could block the air inlet and air outlet.

FIG 9 User Maintenance Instructions

FIG 10 User Maintenance Instructions

Organize the Power Cord

  • Wrap the power cord around the housing, close to rear of the drum fan.
  • Clip the cord to the cord clip on the plug and the drum fan shown above.

Troubleshooting Guide

FIG 11 Troubleshooting Guide

If troubleshooting does not resolve your problem, please contact XPOWER or other parties authorized by XPOWER for further instructions.

Technical Specification

FIG 12 Technical Specification

If your product(s) is not listed above, please visit www.xpower.com for more information.

XPOWER Limited Warranty (USA)

1 YEAR LIMITED WARRANTY

XPOWER-branded products purchased in the U.S. from authorized distributors include a 1-year limited warranty. Contact XPOWER to confirm warranty information about your product(s).

This limited warranty covers defects in materials and workmanship in your XPOWERbranded products, purchased in the U.S. ONLY. Local warranty policy (if any) in your country will cover products purchased outside the U.S.

IMPORTANT:

  1. Please finish the online warranty registration before usage. Visit www.xpower.com/ service-support/warranty-registration.
  2. This Limited Warranty applies with its own timeliness. Contact XPOWER or visit www.xpower.com for more information.

Items mentioned but not limited to below are not covered by warranty:

  1. Power cord, filters or any other components considered as a “consumable parts” by XPOWER.
  2. Normal wear and tear. (3) Problems that result, directly or indirectly, at XPOWER’s sole discretion, from:
  3. Problems that result, directly or indirectly, at XPOWER’s sole discretion, from: (3.1) External causes such as accident, abuse, misuse or problems with electrical power supply. (3.2) Disassembling, servicing or modification not authorized by XPOWER. (3.3) Usage that is not accordance with product instructions stated in Owner’s Manual. (3.4) Failure to follow the product instructions or lack of necessary maintenance stated in Owner’s Manual.

Before contacting XPOWER, please try one or more of the following:

  1. Consult this Owner’s Manual and follow the instructions of troubleshooting guide.
  2. Access www.xpower.com for more advice and information that could be helpful to address your problems.

If you need additional assistance from XPOWER, please:

  1. Email info@xpower.com
  2. Call XPOWER U.S. Customer Service Department at 855-855-8868 or other numbers provided on www.xpower.com.
  3. Visit XPOWER U.S. Head Office at 240 Clary Ave., San Gabriel, CA 91776 or the most current address provided on www.xpower.com.

Please also have your original proof of purchase and the serial number(s) of your product(s) ready when you contact XPOWER.

If you are instructed to return the unit for service or replacement, please:

  1. Request a RMA (Return-Merchandise-Authorization) number.
  2. Use the original or an equivalent packaging, prepay shipping charges at your own expense to the address provided by XPOWER, with the RMA number on the shipping label or the packaging.
  3. Include all the original parts and components.

XPOWER will inspect, assess and advise the repairs needed and applicable cost, if any. For products under warranty, we will pay to ship the repaired or replaced product(s) to you if you use an address within the Contiguous United States. Otherwise, we will ship the product(s) to you at your own expense.

XPOWER Manufacture, INC.

668 S. 6Th Street

City of Industry, CA 91746 www.xpower.com | 1-(855)-855-8868 | info@xpower.com

Read and save these instructions before use

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals