Juicernet HO-3 Table Top Pineapple Peeling and Coring Machine User Guide
- June 6, 2024
- Juicernet
Table of Contents
Juicernet HO-3 Table Top Pineapple Peeling and Coring Machine
Specifications
This table top pineapple peeling & coring machine has all of these specifications:
- Foot print of 10″x15″, 19.5″ tall, 20.5″ front to back
- Aluminum T6 6061 handle (1/4″ thick)
- All stainless steel construction (304 grade s/s)
- All hardware is stainless steel (304 grade s/s)
- All plastics including grip, base, and slide blocks are virgin HDPE
- Base has 4 replaceable solid rubber suction cups
- All parts are replaceable
- Machine weighs 17 lbs.
- Different sized cutting assembles are available: 84mm (7/8 Size Blade); 96mm (6/7 Size Blade
– standard); 108mm (5/6 Size Blade); and 122mm (4/5 Size Blade)
All grades of materials used to manufacture this machine are of FDA approved for direct food contact.
Operation Guide
- Cut top and bottom off parallel to each other. (Make sure to cut enough off so that the blade will start the cut on the meat of the pineapple).
- Lift the handle of the machine to the upmost position
- Place the pineapple under the blade and slowly lower the handle, making sure to center the outside blade to the center of the cut pineapple.
- Place two hands on the handle and firmly pull down until the blades contact the base.
- Remove the peel from the pineapple and then lift the handle up. This will push the peeled and cored pineapple from the blade and set it on the base.
- With your hand still on the handle, remove the peeled and cored pineapple.
- Caution! Cutting assemblies are very sharp. Never put your hands under the cutting assemblies without one hand on the handle, and never hold the pineapple while you are cutting the pineapple.
- Properly hand wash, rinse, and sanitize (follow your local health code standards).
WARNING!!! This machine is not designed to have the handle stay in the up position!!!!
Correct Prep for Tabletop Pineapple Corer
MADE IN USA
Mulligan Associates, Inc. 286 Barbados Drive, Jupiter, FL 33458
800-627-2886 /
561-277-2466 Fax
www.juicernet.com
Documents / Resources
|
Juicernet HO-3 Table Top Pineapple Peeling and Coring
Machine
[pdf] User Guide
HO-3, Table Top Pineapple Peeling and Coring Machine
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>