Adaptive ADVM-FD1 Ford with Sync3 8-Inch Touchscreen User Guide
- June 6, 2024
- Adaptive
Table of Contents
Adaptiv Mini Fitting & User Guide
ADVM-FD1
Ford with Sync3 8″ Touchscreen
www.adaptiv-multimeadia.com
Adaptiv Mini
Adaptiv Mini allows HDMI & Camera input to the OEM screen.
This plug-and-play Mini interface adds HDMI to connect your Apple or Android
device, allowing you to mirror your smartphone display on the vehicle’s
original screen.
Inputs for front and rear aftermarket cameras also come as standard with the
Mini.
Application
For Ford vehicles with Sync3 systems and 8″ display (dash embedded-style).
Note: Not for vehicles with newer Sync3.2 systems or tablet-style
displays. Please see Part Number ADVM-FD2
Kit Includes
Adaptiv Interface Vehicle Harness
Prior to installation
Read the manual prior to installation. Technical knowledge is necessary for
installation.
The place of installation must be free of moisture and away from heat sources.
Connects2 cannot be held responsible for the installation of this product.
Technical Support
Connects2 wants to provide a fast and suitable resolution should you encounter
any technical issues. With this in mind, when contacting Connects2, try to
provide as
much information as possible. This will speed up the process and help us to
help you.
Please use our dedicated online technical support centre:
support.connects2.com
CONNECTION DIAGRAM
DIP SWITCH SETTINGS
Button Configuration
Button 1 – Left arrow (steering wheel) or SOUND button on OEM head unit
Button 2 – Right arrow (steering wheel)
HDMI Access
Connect the USB dongle supplied to the Sync USB input. Select USB source
from the OEM menu sources. The dongle will appear as ‘USB AUX’.
Hold BUTTON 1** for 2 seconds to switch between OEM screen and Adaptiv Mini
HDMI screen
Video In Motion Warning – 10 MPH
Hold BUTTON 2 ( or press the top right corner of the touch screen ) to
disable the video in the motion warning message
Rear and Front Camera Access
From either HDMI mode or OEM model
- Select reverse gear for reverse camera
- Deselect reverse gear – will go to after market front camera ( if DIP 2 ON )
Press top right corner of screen to cancel front camera or drive over 10 MP
Front Camera Access
Hold BUTTON 2 for 2 seconds to enter the front camera screen ( if DIP 2 is
ON ) or double press the SOUND button on the OEM head unit.
View Version Number
Hold BUTTON 1 Button for 8 seconds to enter firmware information screen
**Note that there may be a slight delay in HDMI audio lip-sync, due to the USB
audio buffer time of the OEM system. This is dependant on the manufacturer
original equipment specification.
ADVM-FD1 FORD SYNC3
Documents / Resources
|
Adaptive ADVM-FD1 Ford with Sync3 8-Inch
Touchscreen
[pdf] User Guide
ADVM-FD1, Ford with Sync3 8-Inch Touchscreen
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>